Products not found
The Series IEF Insertion Electromagnetic Flow Transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use. One unit is adjustable to fit pipe sizes from 4 to 36″ (102 to 914 mm), and offers several output options including selectable BACnet MS/TP or Modbus® RTU communications protocol over 2-wire RS-485 in addition to the standard analog, frequency and alarm outputs.
price by request
Available
LGXS wedge flow meter is a new type of flow element which has been widely used in recent years. Wedge flow meter is very suitable for low Reynolds number fluid flow measurement, especially when measuring the high viscosity fluid, solid particle fluid and slurry fluid.
price by request
Available
Asameters model L…38 _ 39 all made of stainless steel are designed for low flow rates with any type of gas or liquid also aggressive, at extreme process and environmental conditions (high pressures and/or low or high temperatures).
price by request
Available
LGV V-cone flow meter is the second generation inner cone flow meter. It is a good performance differential pressure flow meter developed by Dandong Top Electronics Instrument (Group) Co., Ltd in cooperation with Tianjin University. The unique support and taper angle design enables it to measure the flow rate of various medium such as gas, liquid and vapor under very short straight pipe section conditions.
price by request
Available
The Series GFM2 Gas Mass Flow Meter is an ideal choice for the measurement of flow rates of a wide variety of gases. Unit can be calibrated for a variety of gases with user selectable 0 to 5 VDC or 4 to 20 mA and two relay outputs and programmable totalizer that indicates total gas quantity.
price by request
Available
LGP balanced flow meter is a flow element developed on the basis of standard orifice plate. Its sensor is a porous disk throttling rectifier mounted on the section of the pipe. Size and distribution of each hole are customized based on test data and become function holes. The balanced flow meter sensor can realize the fluid balance measurement skillfully, obviously reduces the eddy current formation, reduces the dead effect and the fluid kinetic energy loss.
price by request
Available
Operating principle of LGB Annubar Flow Meter is the same as that of other kinds of differential pressure flow meters, Annubar Flow Meter is superior to other differential pressure flow meters because of its unique structure.
price by request
Available
UFM ultrasonic flow meter is widely used in the long-term on-line measurement of various liquids, suitable for all dense pipes. The sensor of flow meter is divided into external clamp type, plug-in type and pipe section type, in which the external clamp type and plug-in type can be continuously and uninterrupted flow installation. The main engine can be installed in the indoor, instrument cabinet, the sensor is installed on the pipe, the main engine and sensor are connected by custom cable, the flow rate can be measured, and the ration temperature sensor can realize the heat measurement.
price by request
Available
The Sanitary Electromagnetic Flowmeter is also called hygienic magnetic flow meter and tri-clamp magnetic flow meter. It is a food grade flow mter and ideal for food, beverages, beer, milk and pharmaceutical industries. Sanitary flow meter can meet the hygienic demand and achieve accurate and reliable flow measurement.
price by request
Available
NBLB target flow meter is a new generation of flow meter developed by our company. It adopts a new force-torque tube-corner conversion mechanism, transfers the angle through the torque tube, then measures the angle through the high precision Hall sensor and outputs the voltage signal corresponding to the flow change and outputs the standard 4 mA~20 mA square (linear) current analog signal. The instrument has the modern popular enclosure design, the shape is beautiful and each working chamber is isolated, uses the non-contact angle measurement technology to avoid the strain sensor force deformation, safe and reliable.
price by request
Available
Aimag A electromagnetic flow meters is a products that developed for sewage, water, wastewater flow measurement. Widely used in metering and custody transfer. And can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions. The diameter of the electromagnetic flowmeter ranges from DN6 to DN3000.
price by request
Available
The Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter is available in a variety of materials including PVC, Aluminum, Brass, or 316 stainless steel. The variety of optional materials allows the flowmeters to be used in many different applications. The Series INSITE Flowmeters are also available with an optional field adjustable reed switch for high and low alarms.
price by request
Available
MTF variable area flow meter for micro flow can measure tiny liquid or gas, which has the characteristics of stable and reliable measurement and wide application range. The instrument is equipped with a fine-tuning valve to facilitate the user’s setting of a specific flow rate. Instrument is based on the float measurement principle. According to the flow direction of the medium, it can be divided into side in and out, bottom in and out of two types. According to the display mode, it is divided into mechanical pointer type and liquid crystal display with 4-20 mA current output type.
price by request
Available