Products not found
Series TFM-LI Liquid Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.
Retail price from $1436,6
Available
The Series DTFF Fixed-Orifice Flowmeter for Low Flow Rates measures water, oil, or air flow rates with great accuracy at a competitive price. Rugged stainless steel construction ensures great compatibility and is an excellent choice for high line pressure applications, with a maximum pressure of 3000 psig (200 bar). This is all without sacrificing the sensitivity required for low flow measurements. Available in a wide range of flow rates for each calibration, with stainless steel construction as standard. Comes pre calibrated for horizontal in-line mounting.
Retail price from $914
Available
The Series TFM-LP Liquid Flowmeters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC and pulsed output signal for recording and data logging. A power adapter or mating cable assembly is required for operation
Retail price from $1019,45
Available
The Series DTFW Variable-Area Flowmeter for Liquids measures water flow rates with ± 2% of full-scale accuracy at a competitive price. Durable metal construction ensures great compatibility and the strength to withstand system pressures of up to 3000 psig (200 bar). 1/4″, 1/2″ and 1″ connections are available, with construction choices of a high quality brass or stainless steel. Comes pre-calibrated for horizontal in-line mounting.
Retail price from $627,2
Available
The Series HFT In-Line Transmitters provide continuous monitoring of flow rate levels via a direct reading in-line flowmeter with electronics to provide proportional 4 to 20 mA, 0 to 5 and 1 to 5 VDC analog outputs. Calibration Option available under Accessories.
Retail price from $1377,6
Available
Aimag C Electromagnetic flowmeter is specailly designed for corrosive liquid, such as acid, sulfuric acid, acetic acid, niteric ascid, brine, sea water, alcohol, ammonia liquid ect. Aimag C flow meter use chemical resistant electrodes and liner, and can withstand 40Mpa high pressure flow meter.
Aimag C is best chemical-resistant flow meter for corrosive liquid. The diameter of the electromagnetic flowmeter ranges from DN6 to DN3000.
price by request
Available
The Series TVF Total View Industrial Flowmeters are economically priced, tough, simple and accurate meters. The flowmeters have a full-scale accuracy of ±2% and constructed of T-316 stainless steel. The Series TVF flowmeters are available with standard 3/4″ and 1-1/2″ female NPT connections.
price by request
Available
LWQ gas turbine flow meter integrates gas turbine flow sensor and flow converter, its main performance index reaches the international advanced level. It is an ideal instrument for gas metering such as petroleum, chemical industry, electric power, metallurgical industry and civil boiler, as well as for urban gas and gas pressure regulating station metering and gas trade metering.
price by request
Available
Aimag D clamped electromagnetic flowmeter is specially designed for mediums with limited installation space. And it is widely used in flow measurement of raw water, drinking water, process water and sewage.
price by request
Available
The Series SSM Metal Flowmeters are rugged, general purpose industrial flowmeters with a direct reading scale and ±2% accuracy. These meters are of T316SS construction and offered in 3/4″ and 1-1/2″ process connections.
price by request
Available
LUGB vortex flow meter is a kind of speed flow meter, widely used in petroleum, chemical industry, electric power, light industry, power heating industry. Our company’s vortex flow meter production execution standard is vortex flow sensor (JB/T9249-2015) and verification regulation vortex flow meter (JJG10299-2007).
price by request
Available
Vortex flowmeter has no moving parts, simple layout of measuring elements, reliable function and long service life. The volume flow of the vortex flowmeter is not affected by thermal parameters such as temperature, pressure, density or viscosity of the fluid being measured. It usually does not need to be calibrated on its own. It can measure the flow of liquid, gas or steam. The resulting pressure loss is small. In addition, the vortex flowmeter has the advantage of high accuracy.
price by request
Available
LG magnetic flow meter is suitable for conductive medium with conductivity greater than 5μS/cm and with wide nominal diameter range. It is also suitable for various conductive environment conditions where is no pressure loss, with a variety of power supply modes and signal output. It uses standard RS-485 serial communication interface and support international common standards MODBUS-RTU communication protocols, GPRS and other wireless and wired communication networking methods. It can also provide wireless meter reading system (computer management software and database) that can be accessed by remote network.
price by request
Available
Aitex E-type vortex flow meter is a steam vortex flow meter with excellent reliability and performance. ARTang Aitex E vortex flow meter adopts unique signal processing technology, and has better stability, accurate measurement. ARTang provides a wide range of products to meet all customer requirements.
price by request
Available
LBTC positive displacement rotary vane flow meter belongs to volumetric flow meter, which is one of the more accurate instruments in modern industrial liquid measurement.
price by request
Available
Temperature & pressure compensation vortex flowmeter adopts Karman vortex street principle, and the sensor has built-in piezoelectric crystal and integrated temperature and pressure measurement function, which can measure gas temperature and pressure, ensure more accurate volume or mass flow.
price by request
Available
Flow element, also known as differential pressure flow meter, consists of a primary detection piece (flow element) and a secondary device (differential pressure transmitter and flow indicator). Flow element is the most stable and reliable of all flow meters, which has a history of more than 100 years. Its wide applicability, high reliability and accurate accuracy make it widely used in the measurement of gas, liquid and vapor.
price by request
Available
Asameters model C-G…38/39 all made of stainless steel are designed for medium and high flow rates for every kind of gas (mod. C) and liquid (mod. G) also aggressive, at extreme operating and environmental conditions (high pressures and/or low or high temperatures).
price by request
Available
LGY compact orifice plate flow meter is composed of flow element, differential pressure transmitter, three-way manifold, temperature sensor and pressure sensor, which can measure liquid, gas, vapor and other medium.
price by request
Available
Asameters model C/G …47 _ 50 all made of stainless steel are designed for applications in potentially explosive areas thanks to their flameproof design, certified ATEX Ex ia IIC T4, T6… Zone 0 and Zone 1 (on request).
price by request
Available
The Series IEF Insertion Electromagnetic Flow Transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use. One unit is adjustable to fit pipe sizes from 4 to 36″ (102 to 914 mm), and offers several output options including selectable BACnet MS/TP or Modbus® RTU communications protocol over 2-wire RS-485 in addition to the standard analog, frequency and alarm outputs.
price by request
Available
LGXS wedge flow meter is a new type of flow element which has been widely used in recent years. Wedge flow meter is very suitable for low Reynolds number fluid flow measurement, especially when measuring the high viscosity fluid, solid particle fluid and slurry fluid.
price by request
Available
Asameters model L…38 _ 39 all made of stainless steel are designed for low flow rates with any type of gas or liquid also aggressive, at extreme process and environmental conditions (high pressures and/or low or high temperatures).
price by request
Available