Gas & Air temperature sensors

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.

• Temperatura range -200÷550ºC  RTD 
• sensing element: Pt100/Pt500/Pt1000 resistor
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head
• measuring insert: pipe or mineral insulated version

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.

• Temperatura range -40÷300ºC TC
• sensing element: J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• thermowell material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head
• measuring insert: pipe or mineral insulated version

Temperature sensor suitable for temperature measurement of liquid and gaseous media. Built-in LED display enables local temperature reading.

• Temperatura range -40÷550ºC TC
• sensing element: J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type XDI-80, IP65 – 20÷70ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.

• Temperatura range -40÷550ºC TC
• sensing element: J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has ceramic protection tube.

• Temperatura range: 600÷1700ºC B
• ceramic tube: mullite 610 or corundum 799
• connection head type AA IP53, – 40÷100ºC
• sheath material: acid-resistant steel 1.4841, and ceramic
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

• Temperature range:
  • -40÷300ºC K
  • -40÷400ºC K
• connector with bayonet mount
• bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
• material: nickel-plated brass

Sensor suitable for temperature measurement of movable or replaceable parts of machines, liquid and gaseous media. Straight and solid construction can be used in various applications.

• with thread T…GE-5, without thread T…GE-6
• fiberglass insulation, metallic overbraid
• material: stainless steel 1.4541

Sensor suitable for temperature measurement of motor windings. Sensor construction enables quick and easy installation.

• flexible laminate with heat shrink jacket
• Cu wire resistance ~0,14 Ω/m = ~0,36°C

Mineral insulated sensor with strengthened sheath suitable for measurement of liquids, semifluid masses or loose materials with high density or flow in conditions of great vibrations.

• other lead wire insulation types: tefl on, armour, fi berglass
• mineral insulated thermocouple ø4,5 mm, with sleeve and nut M14x1,5 for sensor mounting
• materia: stainless steel 1.4541 and INCONEL

Temperature sensor suitable for measurement of ambient temperature, mainly in industrial space like warehouses, production halls, etc. as well as under roofs and open spaces. It has an aesthetic housing made of plastic adequate for wall mounting and perforated sheath made of anodized aluminium. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.

• perforated sheath
• humidity max. 85% RH
• housing: material polycarbonate, IP67
• material: stainless steel 1.4541

Temperature sensor suitable for measurement of liquid and gaseous media. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)

• process connection with G1/2 or M20x1,5 thread
• connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
  XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65
• sheath material: acid-resistant steel 1.4541
• cable gland ATEX II GD IP65 (for cable 5÷10 mm)
• Exi acc. to ATEX

Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1/2G Ex ia IIC T6 II 1/2D

• welded threaded connector
• thermocouple sensor with insulated hot junction
• sheath material:stainless steel 1.4541
• Exi acc. to ATEX

Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66

• process connection with G1/2 or M20x1,5, 1/2NPT thread
• aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
• aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
• stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
• sheath material: acid-resistant steel 1.4541, flange PN16, DN20. DN25
• cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
• Exd acc. to ATEX

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.

• Temperatura range: -40÷550ºC TC
• sensing element:  J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head
• measuring insert: pipe or mineral insulated version

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the the bottom of the sensor thermowell.

• Temperatura range -200÷550ºC RTD
• sensing element: Pt100/Pt500/Pt1000 resistor
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head
• measuring insert: pipe or mineral insulated version

Temperature sensor suitable for temperature measurement of liquid and gaseous media. Built-in LED display enables local temperature reading.

• Temperatura range -40÷550ºC TC
• sensing element: K thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type XDI-80, IP65 – 20÷70ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.

• Temperatura range -40÷550ºC TC
• sensing element: K thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has ceramic protection tube.

• Temperatura range: 600÷1700ºC B
• ceramic tube: mullite 610 or corundum 799
• connection head type AA IP53, – 40÷100ºC
• sheath material: acid-resistant steel 1.4841, and ceramic
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement of movable or replaceableparts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

• Temperatura range -50÷400ºC Pt100
• connector with bayonet mount
• bayonet fitting with connector– nickel-plated brass
• material: stainless steel 1.4541

Sensor suitable for temperature measurement of movable or replaceable parts of machines, liquid and gaseous media. Straight and solid construction can be used in various applications.

• with thread T…GE-5, without thread T…GE-6
• fiberglass insulation, metallic overbraid
• material: stainless steel 1.4541

Miniature, angular Pt100 sensor suitable for temperature measurement of small parts of machines and devices where precision is required.

• TOPMK-1 unsheathed resistor
• material: stainless steel 1.4541

Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of resistor placed in the thin-walled acid-resistant sheath with welded process connection and plug installed on the sheath. It is equipped with additional straight or angled connector for joining lead wire with outer devices

• connector operating temperature: (-40 ÷ 100) °C
• plug GDM + socket GSP (IP65)
• material: stainless steel 1.4541
• sheath constricted ø6/ø4 mm