Temperature sensors & transmitters price list in Latvia – Page 11 of 15

LIMATHERM TTJE-462 Themocouple

Sensor suitable for temperature measurement of enclosures, movable parts and injection moulds.

flat (P) or tapered (S) tip
quick disconnect SZ with thread (standard – M12x1)
thread K (standard – M12x1)
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPE-6 RTD

Temperature sensor suitable for measurement of machine and device outer surface, especially their bodies, blocks, etc. For the purpose of mounting the sensor only threaded hole and M4 screw is needed.

stranded Cu wire : 2×0,22 mm²
9 mm wide tip suitable for mounting to flat surfaces with M4 screw
material: stainless steel 1.4541

price by request

Available

LIMATHERM TTJE-244 Themocouple

Temperature sensor suitable for measurement of pipes and shafts. Rigid sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft.

radiator enhancing surface of heat reception with band clamp for mounting on a pipeline DN 15÷200 mm
insulated hot junction SO
material: brass

price by request

Available

LIMATHERM XL-PTTK Themocouple

Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, and low thermal inertia.

performance with head BA
corrosion resistance during high temperature oxidation process of carburising and chlorination (ammonia and nitrides presence)
material OMEGACLAND XL

price by request

Available

LIMATHERM PTTJ-533 Themocouple

Temperature sensor suitable for measurement of liquids, semifluid masses or loose materials in tanks. Temperature measurement can be carried out on three different levels at the same time.

connection head type AA IP53, – 40÷100ºC
temperature transmitter can be mounted in a connection head
material: stainless steel 1.4541, 1.4571 and INCONEL

price by request

Available

LIMATHERM TONZ-850 RTD

Temperature sensor suitable for measurement of outside temperature, both in places exposed to sun and not, mainly in air-conditioning and automation systems of district heating substations. Resistor is placed in a plastic housing. Optionally, sensor can be equipped with transmitter converting measured value to 4÷20mA current.

closed-end sheath
humidity max. 85% RH
housing: material polycarbonate, IP67
material: stainless steel 1.4541

price by request

Available

LIMATHERM TOPCV-1 RTD

Temperature sensor suitable for measurement of aggressive liquid and gaseous media, especially in chemical industry, galvanizing plants, etc.

stranded Cu wire 2 or 4×0,22 mm² with double tefl on insulation
connection head type NS, IP54, -30÷130ºC
sheath material: acid-resistant steel 1.4541 hielded with heat-resistant PVC

price by request

Available

LIMATHERM TOPT-1..EXI RTD

Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 1/2G Ex ia IIC T6 II 1/2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)

process connection with G1/2 or M20x1,5 thread
connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65
sheath material: acid-resistant steel 1.4541
cable gland ATEX II GD IP65 (for cable 5÷10 mm)
Exi acc. to ATEX

price by request

Available

LIMATHERM TTKGWN-5…EXI Themocouple

process connection with G1/2 or M20x1,5 thread
connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65
sheath material: acid-resistant steel 1.4541
cable gland ATEX II GD IP65 (for cable 5÷10 mm)
Exi acc. to ATEX

price by request

Available

LIMATHERM W..P-EXII RTD

Mineral insulated metal sheathed insert is used as a replaceable element of temperature sensors. Insert design enables its installation in the connection head and pressing insert tip to the bottom of the sensor thermowell.

for intrinsically safe (Exi) temperature sensors produced by Limatherm Sensor acc. to ATEX
sheath material: acid-resistant steel 1.4541

price by request

Available

LIMATHERM TTJT-EXD Themocouple

Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66

process connection with G1/2 or M20x1,5, 1/2NPT thread
aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
sheath material: acid-resistant steel 1.4541, flange PN16, DN20. DN25
cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
Exd acc. to ATEX

price by request

Available

SIKA TP37700E.2 Dryblock-temperature calibrator

Best measurement uncertainties on the market
Patented control technology - Fastest stabilisation times on the market - Time savings of up to 50 %
Temperature calibrator with highest temperature range in the TP Premium Series
Use of an extremely resilient metal alloy for long life
Patented touch screen function for simple and convenient operation
Accessories: device under test management with barcode scanner

price by request

Available

LIMATHERM TTKGN-54 Thermocouple

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.

Temperatura range -40÷550ºC TC
sensing element: K thermocouple
process connection with G1/2 or M20x1,5 thread
connection head type BA IP55, – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head
measuring insert: pipe or mineral insulated version

price by request

Available

LIMATHERM TTKU-11 Thermocouple

Temperatura range -40÷1200ºC K
sensing element: J thermocouple
process connection with G1/2 or M20x1,5 thread
connection head type AA IP53, – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head
measuring insert: pipe or mineral insulated version

price by request

Available

LIMATHERM WM2P RTD

Temperatura range -200÷550ºC RTD
sensing element: Pt100/Pt500/Pt1000 resistor
sheath material: acid-resistant steel 1.4541, 1.4571

price by request

Available

LIMATHERM TTKGB-55 Thermocouple

Temperature sensor applied in industrial pipelines, pressure and other tanks for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.

Temperatura range -40÷150ºC TC
sensing element: K thermocouple
process connection with G1/2 or M20x1,5 thread
connection head type MA IP54 – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head

price by request

Available

LIMATHERM TTKP-1 Thermocouple

Temperature sensor suitable for measurement of industrial processes. Sensing element is placed directly in the sheath.

Temperatura range -40÷600ºC TC
sensing element: K thermocouple
connection head type BA IP55, – 40÷100ºC
sheath material: acid-resistant steel 1.4541
temperature transmitter can be mounted in a connection head

price by request

Available

LIMATHERM TTRC-42 Thermocouple

Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has ceramic protection tube.

Temperatura range: 0÷1600ºC R
sensing element: R thermocouple
ceramic sheath material: mullite 610, corundum 799
connection head type BA IP55, – 40÷100ºC
sheath material: acid-resistant steel 1.4541 and ceramic
temperature transmitter can be mounted in a connection head

price by request

Available

LIMATHERM TTKE-26 Thermocouple

Temperature sensor suitable for measurement of movable or replaceableparts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

Temperatura range -40÷400ºC K
connector with bayonet mount
bayonet fitting with connector– nickel-plated brass
material: stainless steel 1.4541

price by request

Available

LIMATHERM TTKE-5 Themocouple

Miniature sensor, with flexible lead wire in armour, suitable for temperature measurement of movable elements, e.g. press moulds, injection moulds etc. It can be applied to measurement of liquids in small tanks and pipelines where atmospheric pressure occurs.

insulated hot junction SO
bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
nickel-plated brass, atmospheric pressure

price by request

Available

LIMATHERM TOPWO-1 RTD

Sensor suitable for temperature measurement in district heating substations. Sensor with welded connector is applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.

flexible protection hose, stainless,
fiberglass insulation, metallic overbraid
material: stainless steel 1.4541

price by request

Available

LIMATHERM TTJE-6 Themocouple

thermocouple stranded wire: 2×0,22 mm²
9 mm wide tip suitable for mounting to flat surfaces with M4 screw
material: stainless steel 1.4541

price by request

Available

LIMATHERM XL-PTTN Themocouple

Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, and low thermal inertia.

performance with head BA
corrosion resistance during high temperature oxidation process of carburising and chlorination (ammonia and nitrides presence)
material OMEGACLAND XL

price by request

Available

LIMATHERM PTTK-533 Themocouple

Temperature sensor suitable for measurement of liquids, semifluid masses or loose materials in tanks. Temperature measurement can be carried out on three different levels at the same time.

connection head type AA IP53, – 40÷100ºC
temperature transmitter can be mounted in a connection head
material: stainless steel 1.4541, 1.4571 and INCONEL

price by request

Available