Temperature Sensors for surface measurement

Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1/2G Ex ia IIC T6 II 1/2D

• welded threaded connector
• thermocouple sensor with insulated hot junction
• sheath material:stainless steel 1.4541
• Exi acc. to ATEX

Sensor suitable for temperature measurement of machinery and device parts. Characteristic for this sensor is that sensing element is placed directly in process connection.

• sheath with thread
• fiberglass insulation, metallic overbraid
• material: stainless steel 1.4541

Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.

• flexible protection hose, stainless,
• round (K), fl at (P), tapered (S) tips
• bayonet fi tting with connector – nickel-plated brass
• material: stainless steel 1.4541

Sensor suitable for temperature measurement of motor windings. Sensor construction enables quick and easy installation.

• flexible laminate with heat shrink jacket
• Cu wire resistance ~0,14 Ω/m = ~0,36°C

Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1/2G Ex ia IIC T6 II 1/2D

• welded threaded connector
• thermocouple sensor with insulated hot junction
• sheath material:stainless steel 1.4541
• Exi acc. to ATEX

Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

• Temperature range:
  • -40÷300ºC J
  • -40÷400ºC J
• connector with bayonet mount
• bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
• material: nickel-plated brass

Sensor suitable for temperature measurement of movable or replaceable parts of machines, liquid and gaseous media. Straight and solid construction can be used in various applications.

• with thread T…GE-5, without thread T…GE-6
• fiberglass insulation, metallic overbraid
• material: stainless steel 1.4541

Temperature sensor with band clamp for measurement of pipes and shafts. The band clamp enables sensor installation on different types of pipes and shafts which are to be measured.

• pipe band clamp diameter 16÷180 mm
• fiberglass insulation, metallic overbraid
• material: stainless steel 1.4301

Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of resistor placed in the thin-walled acid-resistant sheath with welded process connection and plug installed on the sheath. It is equipped with additional straight or angled connector for joining lead wire with outer devices

• connector operating temperature: (-40 ÷ 100) °C
• plug GDM + socket GSP (IP65)
• material: stainless steel 1.4541
• sheath constricted ø6/ø4 mm

Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1/2G Ex ia IIC T6 II 1/2D

• welded threaded connector
• thermocouple sensor with insulated hot junction
• sheath material:stainless steel 1.4541
• Exi acc. to ATEX

Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

• Temperature range:
  • -40÷300ºC K
  • -40÷400ºC K
• connector with bayonet mount
• bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
• material: nickel-plated brass

Sensor suitable for temperature measurement of movable or replaceable parts of machines, liquid and gaseous media. Straight and solid construction can be used in various applications.

• with thread T…GE-5, without thread T…GE-6
• fiberglass insulation, metallic overbraid
• material: stainless steel 1.4541

Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead wire.

• operating temperature -30÷85°C
• screwed plug M12-4 pin – IP67
• material: stainless steel 1.4541

Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1

• movable threaded connector or nut
• thermocouple sensor with insulated hot junction
• sheath material: stainless steel 1.4541

Temperature sensor suitable for measurement of movable or replaceableparts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

• Temperatura range -50÷400ºC Pt100
• connector with bayonet mount
• bayonet fitting with connector– nickel-plated brass
• material: stainless steel 1.4541

Sensor suitable for temperature measurement of movable or replaceable parts of machines, liquid and gaseous media. Straight and solid construction can be used in various applications.

• with thread T…GE-5, without thread T…GE-6
• fiberglass insulation, metallic overbraid
• material: stainless steel 1.4541

Miniature, angular Pt100 sensor suitable for temperature measurement of small parts of machines and devices where precision is required.

• TOPMK-1 unsheathed resistor
• material: stainless steel 1.4541

Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead wire.

• operating temperature -30÷85°C
• screwed plug M12-4 pin – IP67
• material: stainless steel 1.4541

Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1

• movable threaded connector or nut
• thermocouple sensor with insulated hot junction
• sheath material: stainless steel 1.4541