Mechanical flow meters

The Series LFM Polycarbonate Flowmeters are made of precision, injection molded polycarbonate bodies and fittings. This series consists of LFMA, LFMB, LFMC, LFMD, LFME and LFMF flowmeters with 3″ (76 mm), 6″ (152 mm), 5″ (127 mm), 6″ (152 mm), 8″ (203 mm) and 11″ (279 mm) respective scales. They feature dual, direct reading scales measuring in both GPM and LPM.

Orifice Asameters Z6, also said kinetic Z6, have the measuring tube directly connected to the main flange, therefore the reading is made directly on the pipeline. They are suitable for the measurement of large flow of water or clear liquids and have reading scales largely increased compared to conventional flow rate range of orifice Asameters series D6-S6-U6.

Asameters model T with flap indicators are good for transparent liquid flow measurement and mounting on horizontal pipe lines.

Asameters® model V6, proprietary, are flap type flow meters with flow rate reading by pointer, output signal 4-20 mA and HART-Protocol (power supply: 24Vdc ± 10%).

These Asameters® are a sight flow indicators of liquids in pipelines at any angle and direction of flow.

MTF variable area flow meter for micro flow can measure tiny liquid or gas, which has the characteristics of stable and reliable measurement and wide application range. The instrument is equipped with a fine-tuning valve to facilitate the user’s setting of a specific flow rate. Instrument is based on the float measurement principle. According to the flow direction of the medium, it can be divided into side in and out, bottom in and out of two types. According to the display mode, it is divided into mechanical pointer type and liquid crystal display with 4-20 mA current output type.

MTFC series purge device use micro metal pipe float flow meter and constant current valve to form a purge device, which realizes the steady output of flow measurement and pressure fluctuation.

LGP balanced flow meter is a flow element developed on the basis of standard orifice plate. Its sensor is a porous disk throttling rectifier mounted on the section of the pipe. Size and distribution of each hole are customized based on test data and become function holes. The balanced flow meter sensor can realize the fluid balance measurement skillfully, obviously reduces the eddy current formation, reduces the dead effect and the fluid kinetic energy loss.

Asameters model C-G…38/39 all made of stainless steel are designed for medium and high flow rates for every kind of gas (mod. C) and liquid (mod. G) also aggressive, at extreme operating and environmental conditions (high pressures and/or low or high temperatures).

Asameters model C/G …47 _ 50 all made of stainless steel are designed for applications in potentially explosive areas thanks to their flameproof design,  certified ATEX Ex ia IIC T4, T6… Zone 0 and Zone 1 (on request).

Asameters model L…38 _ 39 all made of stainless steel are designed for low flow rates with any type of gas or liquid also aggressive, at extreme process and environmental conditions (high pressures and/or low or high temperatures).

Asameters® E and N series are rugged flowmeters, suitable for measuring instantaneous flow of any type of fluid (gas and liquid), at temperature and pressure conditions kept within glass resistance limits, in absence of water hammer.

Asameters® model 1900 – 1901 – 1903 are instant flowmeters for low flows of any type of fluid (gas and liquid), at temperature and pressure conditions kept within glass resistance limits.They differ among themselves for the nominal length of the reading scale.

Differential pressure regulators model R880 made of stainless steel 316L, when coupled with Asameters model 1900-1901-1903 in s.s. 316L, can keep flow rate constant in presence of variable inlet pressure (mod. 1911-13-15) or outlet pressure (mod. 1912-14-16).

Asameters® model P13 are designed for low and medium flows and made in anti-shock plastic material (Polisulfone or PVC depending on the requirement). They are suitable for use with aggressive fluids such as caustic soda, hydrocloridric acid or acids of another kind and in various concentrations.

The Series IS/PX/TX Insite™ Air/Liquid In-Line Flowmeter is available in a variety of materials including PVC, Aluminum, Brass, or 316 stainless steel. The variety of optional materials allows the flowmeters to be used in many different applications. The Series INSITE Flowmeters are also available with an optional field adjustable reed switch for high and low alarms.

Orifice Asameters U6, also said kinetic, have the measuring tube connected to the main flange, therefore the reading is made directly on the pipeline. They are suitable for the measurement of large flow of fluids.

The Series HFPC/HFPS Flowmeters are a series of clear body, inline flowmeters. This Series consists of the HFPC polycarbonate body flowmeter and the HFPS polysulfone body flowmeter. These flowmeters have dual scales measuring both in GPM and LPM.

Orifice Asameters D6, also called kinetics, have measuring tube separeted from the main orifice and are ideal for remote installation, when the metering point is not the same of that of reading.

The Series TVF Total View Industrial Flowmeters are economically priced, tough, simple and accurate meters. The flowmeters have a full-scale accuracy of ±2% and constructed of T-316 stainless steel. The Series TVF flowmeters are available with standard 3/4″ and 1-1/2″ female NPT connections.

Orifice Asameters S6, also called kinetics, have measuring tube in shockproof plastic and are suitable for the measurement of high flow rates of aggressive fluids (acids and alkali) directly on the pipeline thanks to the metering tube connected with the main orifice plate.

The Series SSM Metal Flowmeters are rugged, general purpose industrial flowmeters with a direct reading scale and ±2% accuracy. These meters are of T316SS construction and offered in 3/4″ and 1-1/2″ process connections.

Orifice plate Asameters, model O, are calibrated measuring devices suitable for liquid, gas and steam even in extreme operating conditions (high temperature, high pressure and corrosive liquids).