Chemical flow meters

Orifice Asameters D6, also called kinetics, have measuring tube separeted from the main orifice and are ideal for remote installation, when the metering point is not the same of that of reading.

LGP balanced flow meter is a flow element developed on the basis of standard orifice plate. Its sensor is a porous disk throttling rectifier mounted on the section of the pipe. Size and distribution of each hole are customized based on test data and become function holes. The balanced flow meter sensor can realize the fluid balance measurement skillfully, obviously reduces the eddy current formation, reduces the dead effect and the fluid kinetic energy loss.

Orifice Asameters S6, also called kinetics, have measuring tube in shockproof plastic and are suitable for the measurement of high flow rates of aggressive fluids (acids and alkali) directly on the pipeline thanks to the metering tube connected with the main orifice plate.

Operating principle of LGB Annubar Flow Meter is the same as that of other kinds of differential pressure flow meters, Annubar Flow Meter is superior to other differential pressure flow meters because of its unique structure.

Orifice Asameters Z6, also said kinetic Z6, have the measuring tube directly connected to the main flange, therefore the reading is made directly on the pipeline. They are suitable for the measurement of large flow of water or clear liquids and have reading scales largely increased compared to conventional flow rate range of orifice Asameters series D6-S6-U6.

Vortex flowmeter has no moving parts, simple layout of measuring elements, reliable function and long service life. The volume flow of the vortex flowmeter is not affected by thermal parameters such as temperature, pressure, density or viscosity of the fluid being measured. It usually does not need to be calibrated on its own. It can measure the flow of liquid, gas or steam. The resulting pressure loss is small. In addition, the vortex flowmeter has the advantage of high accuracy.

Asameters® model V6, proprietary, are flap type flow meters with flow rate reading by pointer, output signal 4-20 mA and HART-Protocol (power supply: 24Vdc ± 10%).

Orifice plate Asameters, model O, are calibrated measuring devices suitable for liquid, gas and steam even in extreme operating conditions (high temperature, high pressure and corrosive liquids).

This new model, at high performance solutions, both as hardware and software, can be defined as an HI-TEC line, addressed to very demanding customers from the point of view of performance and precision.

Output signal is both analogical and digital; and qualitatively the instrument is very performing, having accuracy <+-0,5% of reading and repeatability of 0,1% r.v.

Asameters model T with flap indicators are good for transparent liquid flow measurement and mounting on horizontal pipe lines.

Flanged sensor has a rugged and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube in stainless steel 304 and the outer tube in carbon steel are welded to provide a hermetic seal. Therefore it’s free from long-term maintenance.
Easy and fast to install and start up.

These Asameters® are a sight flow indicators of liquids in pipelines at any angle and direction of flow.

Wafer sensor has a rugged and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube and the outer tube both in stainless steel are welded together to provide a hermetic seal. Therefore it’s maintenance free and provide a long-term reliability. Easy and fast to install and start up.

UFM ultrasonic flow meter is widely used in the long-term on-line measurement of various liquids, suitable for all dense pipes. The sensor of flow meter is divided into external clamp type, plug-in type and pipe section type, in which the external clamp type and plug-in type can be continuously and uninterrupted flow installation. The main engine can be installed in the indoor, instrument cabinet, the sensor is installed on the pipe, the main engine and sensor are connected by custom cable, the flow rate can be measured, and the ration temperature sensor can realize the heat measurement.

Sensor model DIN, Clamp, Gas or SMS has a sturdy and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube and the outer tube both in stainless steel are welded together to provide a hermetic seal. Therefore it’s maintenance free and provide a long-term reliability. It’s available entirely made of stainless steel, also for the housing of the converter.

NBLB target flow meter is a new generation of flow meter developed by our company. It adopts a new force-torque tube-corner conversion mechanism, transfers the angle through the torque tube, then measures the angle through the high precision Hall sensor and outputs the voltage signal corresponding to the flow change and outputs the standard 4 mA~20 mA square (linear) current analog signal. The instrument has the modern popular enclosure design, the shape is beautiful and each working chamber is isolated, uses the non-contact angle measurement technology to avoid the strain sensor force deformation, safe and reliable.

Asameters model C-G…38/39 all made of stainless steel are designed for medium and high flow rates for every kind of gas (mod. C) and liquid (mod. G) also aggressive, at extreme operating and environmental conditions (high pressures and/or low or high temperatures).

The Series IEF Insertion Electromagnetic Flow Transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use. One unit is adjustable to fit pipe sizes from 4 to 36″ (102 to 914 mm), and offers several output options including selectable BACnet MS/TP or Modbus® RTU communications protocol over 2-wire RS-485 in addition to the standard analog, frequency and alarm outputs.

MTF variable area flow meter for micro flow can measure tiny liquid or gas, which has the characteristics of stable and reliable measurement and wide application range. The instrument is equipped with a fine-tuning valve to facilitate the user’s setting of a specific flow rate. Instrument is based on the float measurement principle. According to the flow direction of the medium, it can be divided into side in and out, bottom in and out of two types. According to the display mode, it is divided into mechanical pointer type and liquid crystal display with 4-20 mA current output type.

Asameters model C/G …47 _ 50 all made of stainless steel are designed for applications in potentially explosive areas thanks to their flameproof design,  certified ATEX Ex ia IIC T4, T6… Zone 0 and Zone 1 (on request).

MTFC series purge device use micro metal pipe float flow meter and constant current valve to form a purge device, which realizes the steady output of flow measurement and pressure fluctuation.

Asameters model L…38 _ 39 all made of stainless steel are designed for low flow rates with any type of gas or liquid also aggressive, at extreme process and environmental conditions (high pressures and/or low or high temperatures).

LUGB vortex flow meter is a kind of speed flow meter, widely used in petroleum, chemical industry, electric power, light industry, power heating industry. Our company’s vortex flow meter production execution standard is vortex flow sensor (JB/T9249-2015) and verification regulation vortex flow meter (JJG10299-2007).