Products not found
Temperature sensor suitable for measurement of pipes and shafts. Rigid sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft.
- radiator enhancing surface of heat reception with band clamp for mounting on a pipeline DN 15÷200 mm
- insulated hot junction SO
- material: brass
price by request
Available
Temperature sensor in Alnico type magnet suitable for measurement of steel surfaces. Magnet application enables quick and easy installation of sensor on steel surface where temperature is to be measured.
- mounting: Alnico
- max. working temperature: 450 °C (above 180 °C the paint coat is burnt out)
- sensor sheath mounted with magnet
- material: stainless steel 1.4541
price by request
Available
The Series RHRS Radiation Shield protects outside air humidity transmitters from rain and radiated heat. With the curved shape and color of the plates, air flow is able to move across the sensor to keep radiated temperatures from rooftops and surrounding surfaces from affecting humidity readings.
Retail price from $53,65
Available
The Model A-709 Temperature Transmitter Enclosure can be used to mount our Series 651, 659 and Model TBU-00 transmitters to any of our 1/4″ diameter temperature sensors. The screw on enclosure cover can be quickly removed and has a chain to prevent it from getting lost. The Model A-709 comes with the necessary adapters and fittings for attaching the temperature sensor.
Retail price from $59,8
Available
The Series TE-OND/TE-RND/TE-OSA Outdoor Temperature Sensors are offered different configurations to increase measurement accuracy by reducing radiated heat effects. For applications where the north side of the building is accessible, the TE- OND/TE-OSA can be used to protect against low levels of radiated heat.
Retail price from $28,65
Available
The Series 651 Temperature Transmitter is designed for use with 2 or 3 wire Pt100 RTDs or ungrounded Type K thermocouples. Thermocouple models 651TC are cold junction compensated, automatic 32 to 160°F (0 to 70°C) with upscale burnout.
Retail price from $188.85
Available
The Series TE-SNW Weather Resistant Surface Temperature Sensor non- intrusively measures the process temperature in hot and cold water loops in buildings. In order to work with most common building controllers, the output of the sensor can be chosen from 6 different RTD and Thermistor curves.
Retail price from $40,75
Available
The Series 659 Push-Button Temperature Transmitters accept thermocouple (J, K, T), RTD (Pt100Ω) or thermistor input and provide a linearized 4 to 20 mA output. The transmitter is quickly ranged and calibrated by using a single on-board switch. An LED provides visual indication of sensor fault and programming mode. Models feature reverse polarity protection. Thermocouple models are also galvanically isolated and cold junction compensated.
Retail price from $188.35
Available
The Series ILA In-Line IR Sensors, measure temperatures from 32 to 932°F (0 to 500°C) and provide a linear 4 to 20 mA, or thermocouple output. The 2-wire signal is compatible with almost any indicator, controller, recorder, data logger, etc., without the need for special interfacing or signal conditioning. They are suitable for most materials such as food, paper, textiles, plastics, leather, tobacco, pharmaceuticals, chemicals, rubber, coal, and asphalt.
Retail price from $506,7
Available
The Series TE-E/N Wall Mount Temperature Sensors provide a low cost temperature input for any building management system.
For models with resistive thermistors or RTD outputs, see Resistance vs. Temperature Table.
Retail price from $12,9
Available
The Series BTO Bimetal Thermometer with Transmitter Output eliminates the need for a separate thermometer and transmitter. By only needing one connection, the BTO series reduces installation cost and saves space. The head-mount transmitter is located in a weatherproof thermal head located on the side of the stem. The BTO series is ideal for use on power generating boilers, skid mounted compressors, and thermal oxidation systems.
Retail price from $930
Available
The Series O-4 Outside Air Temperature Sensors are great for monitoring ambient air temperatures in outdoor applications. The temperature sensors are mounted in a NEMA 4X enclosure with integral mounting tabs. The mounting tabs can be used to surface or suspension mount the temperature sensors. The removable terminal block makes installation easy. The Series O-4 can be used to measure outside air temperatures in building automation systems or room temperatures inside agricultural ventilation houses.
Retail price from $14,7
Available
The Series TTE Explosion-Proof RTD Temperature Transmitter is the ideal product for hazardous temperature measurement applications. The TTE series has seven preprogrammed temperature ranges that are selectable via an internal dip switch. For those applications that need a custom range, the transmitter can be easily configured for any range between -30 to 250°F with a minimum span of 40°F. The span and zero can be quickly adjusted with a simple push button design. The compact housing allows for the transmitter to be mounted in virtually any application.
Retail price from $644.8
Available
The Series CC1 Averaging Temperature Sensor Clips are used to mount the capillary of the AVG series temperature sensor to the wall of the duct or air handler. The clips are available in gray or a natural color. The clip can hold 1/8″, 1/4″ or 3/8″ capillary diameters. The top of the mounting clip can also be used to hold a single 1/4″ diameter temperature probes in place. Slots are provided for using nylon zip ties to hold the tubing in place, if needed.
Retail price from $1,95
Available
The Series R Mineral Insulated RTD’s are known for their excellent mechanical durability and resistance to electrical breakdown. Probe sheaths can be bent most any angle without special equipment. The Series R RTD’s are offered in a variety of configuration to meet your application. For smaller sheath diameters, and transition fitting is used between the cold end of the sheath and the extension wires. This fitting is 1-1/4″ long by 1/4″ OD for 1/8″ and smaller sheath diameters, 1-1/2″ long by 3/8″ OD for 3/16″ and 1/4″ sheath diameters. Tip temperatures can be as high as 650°C (1202°F), while fiberglass extension wire is limited to 450°C (842°F).
Retail price from $174,8
Available
The Series TTW Weatherproof Immersion Temperature Transmitter offers a field adjustable temperature transmitter pre-assembled with an RTD sensor and weatherproof enclosure.
Retail price from $345.7
Available
The Series S2-2 General Purpose Surface Temperature Assembly is ideal for monitoring the temperature of indoor distribution lines when it is not possible to penetrate the pipe. The plastic housing is in the shape of a standard junction box with multiple knockouts for easy conduit access. The strap-on connection quickly wraps around a pipe and can be securely tightened using a flat head screw driver. The Series S2-2 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $73,25
Available
Retail price from $21,3
Available
The Series BTT Temperature Transmitters offer transmitter output signals with the same form and fit as our popular TE thermistor and RTD sensors for building HVAC applications. Thermowells are required when using immersion models in liquid applications. Wall mount models are available on the Series BTT-E/N page.
Retail price from $66.05
Available
The Series S2-4 Weatherproof Surface Temperature Assembly is ideal for monitoring the temperature of distribution lines when it is not possible to penetrate the pipe. The strap-on connection quickly wraps around a pipe and can be securely tightened using a flat head screw driver. The twist-off housing cover reduces installation time. The housing has multiple knockout conduit holes which allows the installer to bring conduit to any side of the housing. The Series S2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $110,4
Available
MONITORING THE ENVIRONMENTAL CONDITIONS is more convenient with the Model EMMA multifunction meter. Humidity, temperature, air velocity, air flow, sound and light measurements are combined in one easy to use instrument. The large, dual-line 4-digit LCD display shows both the current and average reading. For reading measurements in dimly lit areas, the display has a built-in back light. Besides measuring the current and average reading, the Model EMMA allows the user to read the minimum, maximum and differential measurement for each of the parameters. Included with the meter is the carrying case, rubber boot, battery and tri-pod.
Retail price from $614,05
Available
The Series BTT-E/N Temperature Transmitter offers transmitter output signals with the same form and fit as our popular Series TE-E/N thermistor and RTD sensors for Building Automation and HVAC installations. Duct mount, immersion and OSA models are available on the Series BTT page.
Retail price from $66.05
Available
The Series I2-4 Weatherproof Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines feeding Air Handlers and Cooling Towers. The plastic housing has a 1/4 turn twist off cover to reduce installation time. The multiple knockouts allow for easy conduit access to any side of the housing. The Series I2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.
Retail price from $44,25
Available
The Model TBU-00 Temperature Transmitter is a high precision temperature transmitter designed to easily mount in most temperature sensor instrument enclosures. The universal input reduces inventory while the micro-USB port facilitates easy configuration, and calibration in the lab or in the field. The versatile TBU model allows for selection and configuration of input type, measurement range, and calibration. The output can be set as either direct 4 to 20 mA, or reverse 20 to 4 mA, through easy to use configuration software.
Retail price from $152.75
Available