Products not found
Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of a bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.
- Temperatura range -40÷400ºC J
- connector with bayonet mount
- bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
- material: nickel-plated brass
price by request
Available
Mineral Insulated Thermocouples are known for their excellent mechanical durability and resistance to electrical breakdown. Probe sheaths can be bent most any angle without special equipment. For smaller sheath diameters, and transition fitting is used between the cold end of the sheath and the extension wires. This fitting is 1-1/4″ long by 1/4″ OD for 1″ and smaller sheath diameters, 1-1/2″ long by 3/8″ OD for 3/16″ and 1/4″ sheath diameters. Tip temperatures limits depend on sensor type, while the fiberglass extension wire is limited to 450°C (842°F). For high temperature applications such as in ovens or kilns, see Series 7 Protection Tube Assembly Thermocouples.
price by request
Available
Sensor suitable for temperature measurement of machinery and device parts. Characteristic for this sensor is that sensing element is placed directly in process connection.
- sheath with thread
- fiberglass insulation, metallic overbraid
- material: stainless steel 1.4541
price by request
Available
Sensor suitable for temperature measurement in district heating substations. Sensor with welded connector is applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.
- flexible protection hose, stainless,
- fiberglass insulation, metallic overbraid
- material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of flat screws and mandrels. The hole inside the ring enables sensor screwing to flat surface or mounting on the mandrel for temperature measurement.
- end flat or annular
- material: stainless steel 1.4541
price by request
Available
Temperature sensor in Alnico type magnet suitable for measurement of steel surfaces. Magnet application enables quick and easy installation of sensor on steel surface where temperature is to be measured.
- mounting: Alnico
- max. working temperature: 450 °C (above 180 °C the paint coat is burnt out)
- sensor sheath mounted with magnet
- material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, and low thermal inertia.
- performance with head NA, IP65
- material stainless steel 1.4541 and INCONEL
price by request
Available
Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, good vibration and shock resistance, and low thermal inertia.
- mounting elements: nickel-plated brass and stainless steel
- straight or angular version
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.
- sensing element: Pt100/Pt500/Pt1000 resistor or J, K, N, T thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type MA IP54, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Available
Temperature sensor suitable for measurement of aggressive liquids and gases. Sensor sheath made of heat resistant glass is suitable for long-term operating in conditions of vapour, acids, alkalis and salts.
- borosilicate glass SIMAX
- connection head type NS, IP54, -30÷130ºC
- stranded Cu wire 2 or 4×0,22 mm2 with double tefl on insulation
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: acid-resistant steel 1.4541, 1.4841 or 1.4762
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIB T6 cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- holding tube
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - ceramic protection tube material: corundum 799
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Available
Mineral insulated metal sheathed insert is used as a replaceable element of temperature sensors. Insert design enables its installation in the connection head and pressing insert tip to the bottom of the sensor thermowell.
- for intrinsically safe (Exi) temperature sensors produced by Limatherm Sensor acc. to ATEX
- sheath material: acid-resistant steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541 or 1.7335
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available