Products not found
Sensor with narrowed sheath applied for temperature measurement of liquid and gaseous media.Narrowed tip enables quick reaction to temperature change. Straight and solid construction is suitable for various applications.
- stheath threaded
- Cu wire resistance ~0,14 Ω/m = ~0,36°C
- material: stainless steel 1.4541
price by request
Available
Thermocouple sensor in additional sheath suitable for temperature measurement of liquids, semifluid masses or loose materials. Additional hardening layer on the sheath tip increases its abrasion resistance.
- PVC hand grip, max. operating temperature 80°C
- three-stepped sheath, at length 200 mm covered with tungsten carbide to enhance
abrasion resistance - material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type MA, IP54 -40÷100ºC
- sheath material: acid-resistant steel 1.4541
price by request
Available
Temperature sensor connected with adequate devices enables temperature measurement, control and recording of liquid alloys of non-ferrous metals. It has special ceramic sheath resistant to corrosive action of metals and their alloys.
- ceramics: HEXOLOY, REFRAX or SYALON
- connection head type BA, IP54, -40÷100ºC
- fitting assembly and extension pipe
- thermal shock resistance
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: acid-resistant steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Available
Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1/2G Ex ia IIC T6 II 1/2D
- welded threaded connector
- thermocouple sensor with insulated hot junction
- sheath material:stainless steel 1.4541
- Exi acc. to ATEX
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541 or 1.7335
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷550ºC TC
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷700ºC J
- sensing element: J thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type AA IP53, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor applied in industrial pipelines, pressure and other tanks for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.
- Temperatura range -40÷150ºC TC
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type MA IP54 – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Available
Temperature sensor suitable for measurement of liquid glass. It has ceramic protection tube and additional platinum sheath. This sensor can be equipped with three thermocouples measuring temperature on different depths.
- Temperatura range: 600÷1700ºC B
- sensing element: B thermocouple
- ceramic tube material: corundum 799
- connection head type AA IP53, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541 and ceramic
- temperature transmitter can be mounted in a connection head
price by request
Available
Miniature sensor, with flexible lead wire in armour, suitable for temperature measurement of movable elements, e.g. press moulds, injection moulds etc. It can be applied to measurement of liquids in small tanks and pipelines where atmospheric pressure occurs.
- insulated hot junction SO
- bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
- nickel-plated brass, atmospheric pressure
price by request
Available
Sensor suitable for temperature measurement in district heating substations. Sensor with welded connector is applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.
- flexible protection hose, stainless,
- fiberglass insulation, metallic overbraid
- material: stainless steel 1.4541
price by request
Available
Sensor suitable for temperature measurement of motor windings. Sensor construction enables quick and easy installation.
- flexible laminate with heat shrink jacket
- Cu wire resistance ~0,14 Ω/m = ~0,36°C
price by request
Available
Thermocouple sensor in additional sheath suitable for temperature measurement of liquids, semifluid masses or loose materials. Additional hardening layer on the sheath tip increases its abrasion resistance.
- PVC hand grip, max. operating temperature 80°C
- three-stepped sheath, at length 200 mm covered with tungsten carbide to enhance
abrasion resistance - material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.
- stranded Cu wire 2×0,25 mm2 with double silicone insulation
- outer thermowell for sensor mounting in pipelines
- sheath material: brass
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. Tight connection of the sensor and thermowell prevents leakage of installation and enables adjustment to the thickness of insulation layer. This sensor has a spring-loaded replaceable measuring insert. Adequate for various applications, mainly on ships and vessels.
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 2G Ex ia IIC T6 II 2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: acid-resistant steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Available
Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1
- movable threaded connector or nut
- thermocouple sensor with insulated hot junction
- sheath material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541 or 1.7335
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the the bottom of the sensor thermowell.
- Temperatura range -200÷550ºC RTD
- sensing element: Pt100/Pt500/Pt1000
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -200÷700ºC J
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.
- Temperatura range-200÷550ºC RTD
- sensing element: Pt100/Pt500/Pt1000 resistor
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor suitable for measurement of liquid glass. It has ceramic protection tube and dusted platinum layer. This sensor can be equipped with three thermocouplesmeasuring temperature on different depths.
- Temperatura range: 0÷1600ºC S
- sensing element: S thermocouple
- ceramic tube material: corundum 799
- connection head type AA, IP53, -40÷150ºC
- protective coat material Pt, PtRh10, PtRh20
- temperature transmitter can be mounted in a connection head
price by request
Available