Immersion temperature sensors

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.

• Temperatura range -40÷300ºC TC
• sensing element: J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• thermowell material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head
• measuring insert: pipe or mineral insulated version

Temperature sensor suitable for temperature measurement of liquid and gaseous media. Built-in LED display enables local temperature reading.

• Temperatura range -200÷550ºC RTD
• sensing element: Pt100/Pt500/Pt1000 resistor
• process connection with G1/2 or M20x1,5 thread
• connection head type XDI-80, IP65 – 20÷70ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.

• Temperatura range-200÷550ºC RTD
• sensing element: Pt100/Pt500/Pt1000 resistor
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has ceramic protection tube.

• Temperatura range: 0÷1600ºC R
• ceramic tube: mullite 610 or corundum 799
• connection head type AA IP53, – 40÷100ºC
• sheath material: acid-resistant steel 1.4841, and ceramic
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

• Temperature range:
  • -40÷300ºC J
  • -40÷400ºC J
• connector with bayonet mount
• bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
• material: nickel-plated brass

Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, and low thermal inertia.

• -200÷500ºC Pt100
• -50÷500ºC Pt100

Temperature sensor suitable for measurement of liquids, semi-liquid masses or loose materials. Temperature measurement can be carried out in a temporary or permanent way. This sensor has sheath with threaded connector.

• sensing element: Pt100/Pt500/Pt1000
• process connection with G1/2, G3/8 other
• connection head type MA, IP54, -40÷100ºC
• sheath material: acid-resistant steel 1.4541

Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIB T6 cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)

• holding tube
• connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
  XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65
• ceramic protection tube material: corundum 799
• cable gland ATEX II GD IP65 (for cable 5÷10 mm)
• Exi acc. to ATEX

This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.

• Temperatura range -40÷300ºC TC
• sensing element: J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• thermowell material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head
• measuring insert: pipe or mineral insulated version

Temperature sensor suitable for temperature measurement of liquid and gaseous media. Built-in LED display enables local temperature reading.

• Temperatura range -40÷550ºC TC
• sensing element: J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type XDI-80, IP65 – 20÷70ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.

• Temperatura range -40÷550ºC TC
• sensing element: J thermocouple
• process connection with G1/2 or M20x1,5 thread
• connection head type BA IP55, – 40÷100ºC
• sheath material: acid-resistant steel 1.4541
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement primarily in heat-treating furnaces, boiler houses, etc. This sensor has ceramic protection tube.

• Temperatura range: 600÷1700ºC B
• ceramic tube: mullite 610 or corundum 799
• connection head type AA IP53, – 40÷100ºC
• sheath material: acid-resistant steel 1.4841, and ceramic
•  temperature transmitter can be mounted in a connection head

Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length.

• Temperature range:
  • -40÷300ºC K
  • -40÷400ºC K
• connector with bayonet mount
• bayonet mount enables quick mounting and immersion length adjustment (good contact with the seat)
• material: nickel-plated brass

Temperature sensor suitable for temporary measurement of liquids, semifluid masses or loose materials. Portable temperature meters intended for cooperation with resistance sensors are used to read the results of measurement.

• PVC hand grip, max. operating temperature 80°C
• flat miniature plug type SMPW (2 pin) or MTP (3 pin)
• material stainless steel 1.4571

Temperature sensor suitable for measurement of liquid and gaseous media, mainly in systems for energy consumption billing.

• sensor pair Pt100 and Pt500 with Central Offi ce of Measures (GUM) approval type PTL05304
• stranded Cu wire 2×0,25 mm2 with double silicone insulation
• outer thermowell for sensor mounting in pipelines
• sheath material:brass

Temperature sensor suitable for measurement of aggressive liquids and gases. Sensor sheath made of heat resistant glass is suitable for long-term operating in conditions of vapour, acids, alkalis and salts.

• borosilicate glass SIMAX
• connection head type NS, IP54, -30÷130ºC
• stranded Cu wire 2 or 4×0,22 mm2 with double tefl on insulation

Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: II 2G Ex ia IIB T6 cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)

• holding tube
• connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
  XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65
• ceramic protection tube material: corundum 799
• cable gland ATEX II GD IP65 (for cable 5÷10 mm)
• Exi acc. to ATEX