Products not found
The Series 629HLP Differential Pressure Transmitters are suitable for measuring over-pressure, under-pressure, and differential pressure in compatible gases and liquids with 1% accuracy. The 629HLP is suitable for all measuring tasks in commercial, industrial or sanitary applications. Its single sensor design allows it to measure small increment pressure changes, and converts them to a linear analog output signal from 4 to 20 mA or 0 to 10 VDC.
Retail price from $419.1
Available
The Dwyer® Series 608 Differential Pressure Transmitters convert positive, negative (vacuum), or differential pressures of clean, dry air or other non-conductive, non-corrosive gases into a standard two wire, 4-20 mA output signal. The use of an ultra thin silicon diaphragm enables precision measurement of differential pressures as low as 0.1″ of w.c. while withstanding high static working pressures up to 100 psig (6.89 bar). The Series 608 transmitters are FM approved intrinsically safe for use in the specified hazardous locations when used with an approved intrinsic safety barrier. The rugged NEMA 4X, stainless steel housing makes this transmitter ideal for use in industrial and process plant environments.
Retail price from $1203.15
Available
The Series 626 Industrial Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X (IP66) stainless steel general purpose housing or cast aluminum conduit housing. The Series 628 Industrial Pressure Transmitters are ideal for OEMs with 1% full scale accuracy sensors. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and gage pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Retail price from $127
Available
Series 636D Differential Pressure Transmitter can be used for measuring pressures of liquids, gases & vapors. All available ranges have an excellent 0.5% F.S. accuracy with a 4-20 mA Output standard or optional 1-5 VDC output. The NEMA 4 housing is an all 316 welded construction that is designed to withstand the harshest environmental conditions. With all 316L wetted materials, this transmitter is compatible with most media. These units are CSA approved explosion-proof for use in specified hazardous locations.
Retail price from $1970.65
Available
The low cost Series 673 Pressure Transmitter is a fixed range transmitter designed for harsh environments and suitable for high shock and vibration applications. Constructed of stainless steel, the Series 673 provides a 4 to 20 mA output signal with 0.25% accuracy. Use the Series 673 in industrial OEM equipment, hydraulic systems, HVAC equipment, industrial engines and compressor control.
Retail price from $402,5
Available
Monitor differential pressure in air/liquid flow systems, HVAC automation, pneumatic systems and process control with the Series 647 Wet/Wet Differential Pressure Transmitter. Units are temperature compensated and provide a 4 to 20 mA output signal which can be interfaced with chart recorders, data loggers and computerized monitoring and control systems
Retail price from $588.25
Available
The Series 636 Fixed Range Pressure Transmitter is a low cost, fixed range, stainless steel transmitter with ±0.30% accuracy. It is designed to continuously measure pressure for years in even the toughest environmental and media conditions. Transmitters are explosion-proof, (FM approved) and meet NACE standards for off-shore applications.
Retail price from $982,45
Available
Pressure transmitter for industrial application, compact design, ceramic sensor
The ST1 model is a compact electronic transmitter with ceramic sensor for air, industrial and technical gases, water and oil.
price by request
Available
Gauge Pressure transmitters compare a pressure relative to atmospheric measure.
price by request
Available
Pressure transmitter for industrial application, compact design, piezoresistive sensor
The ST2 model is a compact electronic transmitter with piezoresistive sensor with excellent linearity, for air, industrial and technical gases, water, oil and process media compatible with AISI 316.
price by request
Available
AE10 is a series of high performance compact pressure transmitter by using ASIC signal conditioning chip and dryceramic capacitive pressure sensor. It has features of anti-corrosion, anti-wear, shock resistance and vibration resistance. lts anti-overload capacity is 5~10 times of therange, completely solved poor overload in small range of other sensors.
price by request
Available
Pressure transmitter for industrial application, piezoresistive sensor
The ST9 model is an electronic transmitter with piezoresistive sensor with excellent linearity, with adjustable zero and span, for air, industrial and technical gases, water, oil and process media compatible with AISI 316. When assembled to diaphragm seals, it measures the pressure of corrosive, highly viscous and hot fluids.
price by request
Available
A pressure transmitter is a mechanical device that measures the expansive force of a liquid or gaseous sample.
Also known as a pressure transducer, this type of sensor is typically composed of a pressure sensitive surface area made of steel, silicon, or other materials depending upon the analyte’s composition. Behind these surfaces are electronic components capable of converting the applied force of the sample upon the pressure sensor into an electrical signal.
price by request
Available
The Series ISDP Differential Pressure Transmitter provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. The ISDP offers simplified programming via a Menu key that enables the user to select: security level; English or Metric engineering units; pressure, velocity or flow operation, K-factor for use with various Pitot tubes and flow sensors, circular or rectangular duct size for volumetric flow operation plus many more. The Series ISDP Differential Pressure Transmitter is powered on its two wire loop with 10-35 VDC via its integral M-12 four pin male connector. The ISDP provides a 0.5% full scale accuracy on ranges from 0.25″ w.c. to 100″ w.c. as well as bi-directional models up to 10″ w.c. These features make the Series ISDP Differential Pressure Transmitter the ideal instrument for monitoring pressures or air flows in hazardous zones having a Class I Div. I Groups A, B, C, D; Class II Div. I Groups E, F, G; Class III Div. I ratings.
price by request
Available
Pressure transmitter for industrial application, ceramic sensor
The ST18 model is an electronic transmitter with ceramic sensor, with adjustable zero and span, for air, industrial and technical gases, water and oil. When assembled to diaphragm seals, it measures the pressure of corrosive, highly viscous and hot fluids.
price by request
Available
Differential Pressure (DP) is defined as the difference between two pressures. Differential Pressure Transmitters use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side.
price by request
Available
Piezoresistive pressure transmitter flush diaphragm, double sealing, 0,5% accuracy
price by request
Available
Differential Pressure (DP) is defined as the difference between two pressures. Differential Pressure Transmitters use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side.
price by request
Available
Pressure transmitter flush diaphragm
✔ Wetted parts: st.st.AISI 316L.
✔ Process fluid temperature: up to 300°F (+150°C).
✔ EMC emission and immunity: as per EN 61326.
✔ Wiring: shieldless cable.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Differential Pressure (DP) is defined as the difference between two pressures. Differential Pressure Transmitters use a reference point called the low-side pressure and compare it to the high-side pressure. Ports in the instrument are marked high-side and low-side.
price by request
Available
Pressure transmitter for food industry and sanitary applications
✔ Construction and finishing: as per 74-06.
✔ Wetted parts: AISI 316L st.st.
✔ EMC emission and immunity: as per EN 61326.
✔ Calibration: adjustable.
✔ Full traceability
price by request
Available
Intrinsically safe pressure transmitter, ATEX version
✔ Zones : 0, 1, 2, 20, 21, 22
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Intrinsically safe pressure transmitter, ATEX version
✔ Zones : 0, 1, 2, 20, 21, 22
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
- SMART Transmitter 4-20mA + HART protocol
- Span limits : -1 to 100 bar
- Rangeability : 16:1
- Accuracy : 0.1%
- Power supply 10.5 to 45 VDC
- Process wetted parts material 316L stainless steel
- Process connection direct
- Burnout signal according NAMUR NE43 recommandations
- Long term stability : +/-0.1% of maximum span / 10years
Options: Local analog or digital Indicator; Intrinsically safe version; Explosion proof version; FM, CSA and IECEx certification; Stainless Steel electronic housing
price by request
Available