Supplier of control and measuring instruments in Latvia, Estonia and Lithuania. Worldwide delivery
Supplier of control and measuring instruments in Latvia, Estonia and Lithuania. Worldwide delivery
The WSERD air flow monitor is suitable for monitoring fans, control flaps, humidifiers and electrical heating registers in accordance with DIN 57100, Part 420 and for use with DDC systems. The air flow monitor works according to the calorimetric principle. The extraction of heat by the air flow is measured and converted into the switching value. The sensor contains a heating element and two temperature sensors. A microcontroller controls the heating and measures the temperature differences. From the stored calibration curves, it calculates the air flow speed and transmits the value serially to the control unit. Here another microcontroller determines the switching behavior of the two relays from the default values of the setting controls.
Made in Germany. brand ALRE, model WSERD
Fast delivery to Latvia, Estonia and Lithuania. International delivery to Europe, Asia, Africa and other continents available on request
Our warehouse is located in Riga, Latvia.
price by request
Available
Official distributor in Latvia
Time-tested American, European and Asian brands of control and measurent instruments
Special price list for organisations
We offer a significant discount for trade organisations and manufacturing companies
Worldwide shipping on request
We take care of all logistics and customs clearance. Fast delivery to Baltic countries
After-sales service and support
Warranty service and repair, expert assistance in the operation of the instruments
| Type | 534.446 | 134.446 | |
| Articlenumber | G8000429 | G8000428 | |
| Adjustable tripping value for flow with fluids | 0,2 m/s | ||
| Adjustable tripping value for flow with gases | 10 m/s | 10 m/s | |
| Ambient temp. for evaluation electronics from | 0 °C | ||
| Ambient temp. for evaluation electronics up to | 50 °C | ||
| Bearing temperature, lower value | -10 °C | ||
| Bearing temperature, upper value | 70 °C | 75 °C | |
| Can be read off | No | ||
| Degree of contamination | 2 | ||
| Depth | 85 mm | ||
| Electric connection | Screw terminals | ||
| Height | 69 mm | ||
| Housing material | Plastic | ||
| Included with probe | Yes | ||
| Length of sensor | 165 mm | ||
| Max. sensor temperature | 90 °C | ||
| Maximum switching current | 8 A | ||
| Maximum switching voltage | 230 V AC, 50 Hz | ||
| Medium | Air, not aggressive | ||
| Medium temperature | -20 °C | ||
| Min. sensor temperature | -20 K | ||
| Number of switching stages | 10 | ||
| On-delay time | 120 s | ||
| Operating voltage | 100-240 VAC oder 24 V AC / DC | ||
| Potential free switching contact | Yes | ||
| Probe integrated in the device | Yes | No | |
| Protection class | II, following appropriate mounting | ||
| Rated impulse voltage | 4000 V | ||
| Sensor element | Hot film anemometer | ||
| Switching contact | 2 two-way contacts | ||
| Switching difference, can be adjusted | Yes | ||
| Transistor output | 15 s | ||
| Type of protection | IP65 housing side, IP 54 sensor | ||
| Width | 136 mm | ||
| Wire break or measurement circuit monitoring | 20 s | ||
| With display | No | ||
| With explosion protection | No | ||
You can request the necessary certificates, documentation, instructions and user guide for ALRE WSERD using the special form.
You can buy ALRE WSERD in Latvia at a favourable price in «OLIL SIA» by leaving a request on the website, by phone +371 672 70580 or by email olil@olil.lv. ALRE WSERD price are subject to change depending on exchange rates. We deliver instruments by transport companies in Latvia, Estonia and Lithuania. Worldwide shipping to Europe, Asia, Africa, North and South America available on request.
See also: Flow Switches
