Products not found
Designed for use with TestPro and NSA OTDR adapters, this 150m multimode launch cord features SC/UPC to LC/UPC connectivity for fiber link testing.
- Length: 150 m
- Connectors: SC/UPC to LC/UPC
- Fiber Type: Multimode (MM)
- Compatibility: TestPro & NSA (with OTDR adapters)
- Accessory Type: Launch Cord
Retail price from 275 €
Available
In‑line pass‑through adapter for 1G SNR and PoE testing with a connected device, allowing real‑world link performance evaluation.
- Compatibility: TestPro CV100, Network Service Assistant (NSA)
- Function: 1G SNR testing, PoE pass‑through
- Type: Single adapter
Retail price from 660 €
Available
A pair of permanent link adapters for testing and certifying Cat8.2 cabling terminated with TERA connectors, supporting 40GBASE‑T networks.
- Compatibility: TestPro CV100
- Cable Type: Cat8.2 (TERA connectors)
- Configuration: Permanent Link
- Kit Includes: 2 adapters (pair)
Retail price from 880 €
Available
Single remote termination plug for coaxial cable testing with the NSA, designed as a replacement for the coax remote ID #1.
- Compatibility: Network Service Assistant (NSA) with AD-NSA-COAX-KIT
- Cable Type: 75‑ohm coaxial
- Application: Replacement or spare unit
- Application: Coaxial cable remote termination and testing
Retail price from 65 €
Available
Designed for use with TestPro and NSA OTDR adapters, this 150m multimode launch cord features SC/UPC to SC/UPC connectivity for fiber link testing.
- Length: 150 m
- Connectors: SC/UPC to SC/UPC
- Fiber Type: Multimode (MM)
- Compatibility: TestPro & NSA (with OTDR adapters)
- Accessory Type: Launch Cord
Retail price from 275 €
Available
A pair of terminal block adapters for connecting and testing unterminated Single Pair Ethernet cables with TestPro.
- Compatibility: TestPro CV100
- Cable Type: Single Pair Ethernet (SPE)
- Connection: Terminal block (bare‑wire)
- Kit Includes: 2 adapters (pair)
Retail price from 900 €
Available
A pair of channel adapters for testing and certifying Cat8.2 cabling terminated with GG45 connectors, supporting 40GBASE‑T networks.
- Compatibility: TestPro CV100
- Cable Type: Cat8.2 (GG45 connectors)
- Configuration: Channel
- Kit Includes: 2 adapters (pair)
Retail price from 770 €
Available
Singlemode fiber test kit for NSA loopback testing. Enables comprehensive single-ended fiber optic testing with integrated light source, power meter, VFL, and volt meter.
- Application: Singlemode loopback fiber testing
- Compatibility: Network Service Assistant (NSA)
- Wavelengths: 1310/1550nm (Light Source), 850/1300/1310/1550nm (Power Meter)
- Kit Includes: Singlemode adapter, FC/LC interfaces, 2m reference cords, Singlemode Loopback Adapter (EA)
Retail price from 1 980 €
Available
Designed for use with TestPro and NSA OTDR adapters, this 150m multimode launch cord features LC/UPC to LC/UPC connectivity for fiber link testing.
- Length: 150 m
- Connectors: LC/UPC to LC/UPC
- Fiber Type: Multimode (MM)
- Compatibility: TestPro & NSA (with OTDR adapters)
- Accessory Type: Launch Cord
Retail price from 275 €
Available
A pair of terminal block adapters for connecting and testing unterminated 4‑pair copper cables with TestPro.
- Compatibility: TestPro CV100
- Cable Type: 4‑pair twisted‑pair copper (Cat5e – Cat8)
- Connection: Terminal block (bare‑wire)
- Kit Includes: 2 adapters (pair)
Retail price from 900 €
Available
Single patch‑cord test adapter for testing and certifying Cat6A MPTL links with TestPro.
- Compatibility: TestPro CV100
- Application: Cat6A MPTL testing
- Type: Single adapter
Retail price from 305 €
Available
Multimode fiber test kit for NSA loopback testing. Enables comprehensive single-ended fiber optic testing with integrated light source, power meter, VFL, and volt meter.
- Application: Multimode loopback fiber testing
- Compatibility: Network Service Assistant (NSA)
- Wavelengths: 850/1300nm (Light Source), 850/1300/1310/1550nm (Power Meter)
- Kit: Multimode adapter, FC/LC interfaces, 2m reference cords, Multimode Loopback Adapter, 50-micron mandrel (EA)
Retail price from 1 870 €
Available
Enhanced singlemode fiber test kit for Tier-1 certification on TestPro CV100, featuring dual wavelength light source (1310/1550nm), integrated VFL, volt meter, and resistance measurement.
- Wavelengths: 1310 / 1550 nm
- Light Source: Fabry-Perot Laser
- Function: Tier-1 Fiber Certification
- Compatibility: TestPro CV100
- Kit Includes: Adapters, FC/LC connectors, launch & reference cords, coupler, cleaners, carry case
Retail price from 5 450 €
Available
Pair of CAT8.1 channel test adapters for TestPro CV100. Enables Cat8.1 channel certification on the 3000 MHz platform.
- Application: Channel testing (Cat8.1)
- Compatibility: TestPro CV100
- Platform: 3000 MHz, Cat5e–Cat8.2 / Class I/II
- Kit: Pair of channel adapters
Retail price from 225 €
Available
A pair of permanent link adapters for testing and certifying Cat8.2 cabling terminated with GG45 connectors, supporting 40GBASE‑T networks.
- Compatibility: TestPro CV100
- Application: Permanent link testing (Cat8.2 / Class I/II, GG45)
- Connection: Hot-swappable test adapter
- Kit Includes: Pair of adapters (SET)
Retail price from 880 €
Available
Adaption kit for the NSA to test multimode fiber links terminated with SC connectors. Includes SC interfaces and reference cords for precise testing.
- Fiber Type: Multimode (MM)
- Connector Type: SC
- Compatibility: Network Service Assistant (NSA)
- Kit Includes: 1 SC Tx interface, 1 SC Rx interface, 1 FC‑SC Tx reference cord, 2 SC‑SC reference cords
Retail price from 165 €
Available
Enhanced multimode fiber test kit for Tier-1 certification on TestPro CV100, featuring dual wavelength LED light source (850/1300nm), Encircled Flux compliance, integrated VFL, volt meter, and resistance measurement.
- Wavelengths: 850 / 1300 nm
- Light Source: LED (Encircled Flux compliant)
- Function: Tier-1 Fiber Certification
- Compatibility: TestPro CV100
- Kit: Adapters, FC/LC connectors, launch & reference cords, coupler, Sticklers cleaning kit, carry case
Retail price from 4 240 €
Available
Pair of CAT8.1 permanent link adapters for TestPro CV100 using Sentinel Plug.
- Application: Permanent link testing (Cat8.1)
- Technology: Sentinel Plug
- Compatibility: TestPro CV100
Retail price from 375 €
Available
Pair of IEC 63171-1 SPE test adapters with copper LC connectors for TestPro CV100. Enables TIA 568.5-compliant SPE certification for short-reach and long-distance links.
- Application: SPE cabling certification (IEC 63171-1, LC)
- Compatibility: TestPro CV100
- Connection: Hot-swappable test adapter
- Kit: Pair of adapters (SET)
Retail price from 550 €
Available
Adaption kit for the NSA to test multimode fiber links terminated with ST connectors. Includes ST interfaces and reference cords for precise testing.
- Fiber Type: Multimode (MM)
- Connector Type: ST
- Compatibility: Network Service Assistant (NSA)
- Kit Includes: 1 ST Tx interface, 1 ST Rx interface, 1 FC‑ST Tx reference cord, 2 ST‑ST reference cords
Retail price from 165 €
Available
Adaption kit for TestPro platforms to test multimode fiber links terminated with ST connectors. Includes ST interfaces and reference cords for precise testing.
- Fiber Type: Multimode (MM)
- Connector Type: ST
- Compatibility: TestPro CV100
- Kit Includes: 2 ST Tx interfaces, 2 ST Rx interfaces, 2 FC-ST Tx cords, 4 ST-ST Rx cords
Retail price from 330 €
Available
Pair of CAT8.1 permanent link adapters for TestPro CV100 using latching Sentinel Plug.
- Application: Permanent link testing (Cat8.1)
- Technology: Sentinel Plug, latching
- Compatibility: TestPro CV100
Retail price from 375 €
Available
A pair of SPE test adapters with IEC 63171‑6 connectors and RPP interface for testing single‑pair Ethernet links with TestPro.
- Compatibility: TestPro CV100
- Application: SPE cabling certification (IEC 63171-6)
- Test Interface: RPP
- Connection: Hot-swappable test adapter
- Kit Includes: 2 adapters (pair)
Retail price from 550 €
Available
Adaption kit for the NSA to test singlemode fiber links terminated with ST connectors. Includes ST interfaces and reference cords for precise testing.
- Fiber Type: Singlemode (SM)
- Connector Type: ST
- Compatibility: Network Service Assistant (NSA)
- Kit Includes: 1 ST Tx interface, 1 ST Rx interface, 1 FC‑ST Tx reference cord, 2 ST‑ST reference cords
Retail price from 165 €
Available