Supplier of control and measuring instruments in Latvia, Estonia and Lithuania. Worldwide delivery
Supplier of control and measuring instruments in Latvia, Estonia and Lithuania. Worldwide delivery
Made in USA. brand MSA Safety, model PrimaX I
Fast delivery to Latvia, Estonia and Lithuania. International delivery to Europe, Asia, Africa and other continents available on request
Our warehouse is located in Riga, Latvia.
price by request
Available
Official distributor in Latvia
Time-tested American, European and Asian brands of control and measurent instruments
Special price list for organisations
We offer a significant discount for trade organisations and manufacturing companies
Worldwide shipping on request
We take care of all logistics and customs clearance. Fast delivery to Baltic countries
After-sales service and support
Warranty service and repair, expert assistance in the operation of the instruments
The transmitter detects toxic gases and oxygen and is housed in an antistatic, reinforced nylon enclosure. It also has a large, easy-to-read LCD screen and attaches to an integral mounting plate for easy installation, while the built-in keypad makes for quick, simple calibration. To transmit data, the unit uses a 4-20 mA output signal and can also be configured to use HART digital communication. With easily replaced plug-in sensors, the PrimaX I transmitter is suitable for laboratories, chemical plants, power plants and several other industry settings.
Applications
PrimaX gas transmitters are suitable for many industrial applications:
• Agriculture, fertilisers
• Construction
• Storage of hazardous materials
• Laboratory
• Utilities
• OGP
• Chemical plants
• General industry
• Power plants
• Steel plants
• Car industry
• Waste water
• Food and beverages
• Various industrial applications
| DESCRIPTION | Values | PrimaX P | PrimaX I |
| Sensors | |||
| Combustible | Catalytic | + | – |
| Oxygen & Toxic | Electrochemical | + | + |
| Performance | |||
| Typical response time | τ₉₀ ≤ 20 sec. (Combustible) τ₉₀ ≤ 25 sec. (O₂) τ₉₀ ≤ 20 sec. (CO) τ₉₀ ≤ 12 sec. (H₂S) |
+ | + |
| Sensor operating life | up to 3 years in clean air | + | + |
| Operating temperature | –40 °C to +70 °C (–40 °F to +160 °F) | + | + |
| Operating humidity range | 15% to 90% RH non-condensing | + | + |
| Operating pressure range | 80–120 kPa | + | + |
| Electrical | |||
| Supply voltage | 19.2 to 28 VDC (24 VDC nominal) | + | + |
| Output signal | 4–20 mA (max. load 300 ohm) | + | + |
| Power consumption | 3 watt typical at 24 VDC | + | – |
| 0.7 watt typical at 24 VDC | – | + | |
| Terminals | 3 or 4 wire – up to 2.5 mm2 | + | – |
| 2 wire – up to 2.5 mm2 | – | + | |
| Display & Indicators | |||
| Display | Alphanumeric LCD | + | + |
| LED status indicators | Green, Yellow and Red | + | – |
| Options | |||
| HART digital protocol | Diagnostics and configuration | + | + |
| Relay output | Alarm and Fault – 2 A/30 VDC SPDT | + | – |
| Physical | |||
| Ingress Protection | IP 67 | + | – |
| IP 66 | – | + | |
| Weight | 1.6 kg (3.5 lbs) | + | – |
| 1.2 kg (2.6 lbs) | – | + | |
| Dimensions | 220 x 162 x 100 mm (H x W x D) | + | – |
| 220 x 162 x 81 mm (H x W x D) | – | + | |
| Material | Powder coated aluminium | + | – |
| Anti-static reinforced nylon | – | + | |
| Cable gland thread | M25 x 1.5 mm2 | – | + |
| 3/4″ NPT or M25 x 1.5 mm2 | + | – | |
| Approvals | |||
| ATEX/IECEx | Gas – II 2G Ex d ia [ia] IIC T4 Gb Dust – II 2D Ex tb ia [ia] IIIC T130°C Db EN 60079-29-1, EN 50104, EN45544 |
+ | – |
| Gas – II 1G Ex ia IIC T4 Ga Dust – II 2D Ex ia IIIC T130°C Db EN 50104, EN 45544 |
– | + | |
| UL | Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III |
+ | |
| Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups F, G; Class III |
+ | ||
| Other Approvals | CSA, CMC, CCCF, EAC, INMETRO, HART registered, BG RCI | + | + |
| Safety Integrity Level | SIL 2 | + | + |
| Description | PrimaX P | PrimaX I |
| Gases and Ranges | ||
| Methane (100% LEL) | + | – |
| Propane (100% LEL) | + | – |
| Oxygen (25%, 10%) | + | + |
| Hydrogen Sulphide H₂S (10, 20, 50,100 ppm) | + | + |
| Carbon Monoxide CO (100, 200, 500, 1000 ppm) | + | + |
| Ammonia nH₃ (50, 100, 500, 1000 ppm) | + | + |
| Chlorine Cl₂ (5, 10 ppm) | + | + |
| Sulphur Dioxide SO₂ (10, 20, 50, 100 ppm) | + | + |
| Hydrogen Cyanide HCn (10, 20, 30, 50 ppm) | + | + |
| Hydrogen Chloride HCl (10, 20, 30 ppm) | + | + |
| Hydrogen H₂ (1000 ppm) | + | + |
| Nitrogen Dioxide NO₂ (10, 20, 100 ppm) n n | + | + |
| Nitric Oxide NO (100 ppm) | + | + |
| Options | ||
| HART | + | + |
| Relays | + | – |
| Galvanic isolated output | + | – |
| Accessories | ||
| Flow adapter | + | + |
| Pipe mount kit | + | + |
| Sensorgard | + | + |
| Calibration cap | + | + |
| Sunshield | + | + |
| Sensor tag | + | + |
| CalGard remote calibration adapter | + | + |
| Duct Mounting Kit | + | + |
| HART Cable | + | + |
You can request the necessary certificates, documentation, instructions and user guide for MSA Safety PrimaX I using the special form.
You can buy MSA Safety PrimaX I in Latvia at a favourable price in «OLIL SIA» by leaving a request on the website, by phone +371 672 70580 or by email olil@olil.lv. MSA Safety PrimaX I price are subject to change depending on exchange rates. We deliver instruments by transport companies in Latvia, Estonia and Lithuania. Worldwide shipping to Europe, Asia, Africa, North and South America available on request.
See also: Gas detectors & analysers
