+371 672 70580

Mon-Fri: 9:00 - 17:00 LV

Email:

MSA Safety IR400

Photo MSA Safety IR400 Descriptions MSA IR400 Specifications MSA IR400 User Manual for MSA Safety IR400 Related instruments to MSA Safety IR400

MSA IR400 Point IR Gas Detector

MSA IR400 Point IR Gas Detector
  • Industry-leading speed & response: T90 ≤ 3 seconds even with splash guard installed
  • No routine calibration required reducing maintenance costs
  • Industry standard 4-20 mA output provides remote alarm and fault indication
  • Multiple communication outputs provide complete status and control capability in the control room
  • Heated optics eliminate condensation
  • Dirty optics indication discriminates between true fault and cleaning requirements
  • Fast calibration times reduce amount of cal gas required which lowers maintenance time and costs
			int(17061)
NULL

Made in USA. brand MSA Safety, model IR400

Fast delivery to Latvia, Estonia and Lithuania. International delivery to Europe, Asia, Africa and other continents available on request
Our warehouse is located in Riga, Latvia.

price by request

Available

Available

Advantages

Official distributor in Latvia

Time-tested American, European and Asian brands of control and measurent instruments

Advantages

Special price list for organisations

We offer a significant discount for trade organisations and manufacturing companies

Advantages

Worldwide shipping on request

We take care of all logistics and customs clearance. Fast delivery to Baltic countries

Advantages

After-sales service and support

Warranty service and repair, expert assistance in the operation of the instruments

Descriptions of MSA IR400

  • Model IR400 infrared (IR) point detector is a microprocessor-based combustible gas detector that continuously monitors combustible gases in the lower explosive limit (LEL) range and provides a 4 to 20 mA analog signal proportional to the 0 to 100% LEL concentration. The detector also monitors other conditions such as supply voltage and optical path integrity.
  • The IR400 detection principle is based on measuring absorption of infrared radiation passing through a volume of gas using a dual beam, single detector method. IR detector measures the intensity of two specific wavelengths, one at an absorption wavelength and another outside of the absorption wavelength. The gas concentration is determined by a comparison of these two values.
  • Most industrial point IR gas detection applications require a splash guard to protect the
    sensing element from rain and other environmental conditions. In many cases, the addition of a splash guard slows the speed of response considerably and should be taken into consideration.
  • The IR400 gas detector responds within three seconds to gas leaks even with a splash guard installed.
  • Configurations with analog output, Modbus, and HART are available. IR400 provides a twowire
    RS-485 addressable communications link conforming to Modbus protocol that is used to
    monitor the IR400’s status and settings in order to simplify installation and maintenance. Data
    available through HART or Modbus, such as configuration device settings and stored maintenance records, can be used to perform diagnostics and take corrective action before a
    problem occurs.
  • The IR400 is calibrated at the factory and needs no routine field calibration. It requires only a
    periodic cleaning of the windows and re-zeroing to ensure dependable performance

Applications

  • Chemical plants
  • Compressor stations
  • Drilling and production platforms
  • Fuel loading facilities
  • Oil well logging
  • LNG/LPG processing and storage facilities
  • Refineries
  • Wastewater treatment facilities

Technical specifications MSA IR400

System Specifications
Detector Type Infrared absorption type
Measuring Range  0 to 100% LEL
0 to 100% by volume (methane only)
Gases Methane, propane, ethane, ethylene, butane,
hexane, pentane
Consult factory for other gases
Detector Life  greater than 5 years
Accuracy
@ 25°C		 ± 3% LEL at ≤ 50% LEL reading
± 5% LEL at > 50% LEL reading
Zero drift
 		 < 2% per year
Response time 
With Splash Guard		 T50 ≤ 1.5 s, T60 ≤ 1.5 s, T90 ≤ 3 s

Except ethylene where T60 ≤ 2 s and T90 ≤ 4 s
Readout / Relay
Display modules		 DC110; TA102A; IR4000 display, and relay alarms
Accessories Junction box, duct mount junction box,calibration cup, flow block, splash guard,
rain guard, portable purge calibrator
Classification  Class I, Zone 1, IIB + H2
(Ta=-40° C to +75° C)
Ex d, IIB + H2 T5 gb
Ex tb IIIC, T100° C Db, IP66
(Ta=-60° C to +75° C)
Warranty Two years
Approvals ATEx, IECEx, MED, DNV gL, CE,
FM 6310, 6320 and CSA 22.2 No. 152
EN 60079-29-1 Performance Approved
HART Registered, SIL 3 suitable
FM Certified to IEC 61508

Environmental Specifications
Operating temperature range
FM, CSA, GOST-R
ATEx, IECEx
ETHYLENE
 -40° F to +167° F (-40° C to +75° C)
-76° F to +167° F (-60° C to +75° C)
-40° F to +140° F (-40° C to +60° C)
Storage temperature range
 -58° F to +185° F (-50° C to +85° C)
Oparating humidity range
 10% to 95% RH, non-condensing
Electrical Specifications
Input power
 20-36 VDC @ 200 mA max.
24 VDC nominal
Analog signal
START UP, FAULT (non-HART)
START UP, FAULT (HART)*
CAL, ZERO, GAS CHECk*
DIRTy OPTICS*
0 TO 100% LEL
OVER-RANGE
 0-21.7 mA (600 ohms max.)
0 mA
1.25 mA
1.5 mA
2.0 mA
4 to 20 mA (proportional)
20 to 21.7 mA
EMC
 Complies with EN 50270, EN 61000-6-4
Cable requirements
 Max. distance between IR400 and
power source @ 24 VDC nominal
(20 ohm loop resistance):
14 AWg (2.0 mm2) – 3600 ft (1100 m)
Max. distance for analog output (500 ohms max):
14 AWg (2.0 mm2) – 9000 ft. (2740 m)
Faults monitored
 Re-calibration error, EPROM checksum error, optics failure/blockage; low supply voltage, EEPROM checksum error, reference or active lamp failure, heater failure, time to re-zero unit, short circuit on CAL_IO wire
RS-485 output
  Modbus RTU, suitable for linking up to 128 units
or up to 247 units with repeaters
Baud rate
 2400, 4800, 9600, or 19200 BPS
Hart (optional)

 

 HART 6, HART Device Descriptor available.
AMS aware
Wireless communication
 Available with ELPRO Technologies
wireless devices

Mechanical Specifications
Diameter
 2.9” (74 mm)
Length
 8.87” (225 mm)
Weight
ALUMINUM
STAINLESS STEEL
 3 lbs (1.35 kg)
6 Ibs (2.7 kg)
Mounting  ¾” NPT
Ingress protection
 Type 4x, IP66
Housing
 Aluminum 6061-T6 alloy or
316 stainless steel
Standard configuration
 IR400-0-01-1-2-0-1-0
Methane, 4-20 mA, Modbus, aluminum,
splashguard w/screen, no junction box
Load More Items

User Guide and Instruction manual for MSA Safety IR400

You can request the necessary certificates, documentation, instructions and user guide for MSA Safety IR400 using the special form.

You can buy MSA Safety IR400 in Latvia at a favourable price in «OLIL SIA» by leaving a request on the website, by phone +371 672 70580 or by email . MSA Safety IR400 price are subject to change depending on exchange rates. We deliver instruments by transport companies in Latvia, Estonia and Lithuania. Worldwide shipping to Europe, Asia, Africa, North and South America available on request.

See also: Gas detectors & analysers