Vecsafe monitors oxygen and pressure levels in the Vapour Emission Control Systems (VECS). Each vapour line is monitored during loading operations for any over or under-pressurisation or an increase in oxygen levels approaching 8% volume in compliance with USCG and IMO legislation.
Made in United Kingdom. brand Martek Marine, model VECSAFE
Fast delivery to Latvia, Estonia and Lithuania. International delivery to Europe, Asia, Africa and other continents available on request
Our warehouse is located in Riga, Latvia.
price by request
Available
Official distributor in Latvia
Time-tested American, European and Asian brands of control and measurent instruments
Special price list for organisations
We offer a significant discount for trade organisations and manufacturing companies
Worldwide shipping on request
We take care of all logistics and customs clearance. Fast delivery to Baltic countries
After-sales service and support
Warranty service and repair, expert assistance in the operation of the instruments
The system comprises of a deck-mounted enclosure containing an intrinsically safe oxygen sensor and pressure sensor with associated sample pipework, selector switches, and signal communications.The control and alarm panel is normally mounted in the cargo control room (CCR) and provides an alphanumeric display of the oxygen level and pressure reading at each point. Local audio and visual alarms can be initiated from the control panel, and repeater panels are optionally available for wheelhouse and engine control room annunciation.
Features:
MM2000 Control Panel
Power Supply | 110/230V ac 50/60Hz |
Sensor network operating voltage | |
24V dc supplied by the control unit | |
Indicators | Power – Green LED |
Alarm – Red LED | |
Fault – Amber LED | |
Display – Four line alpha numeric | |
Sensor Type/Inputs | Electrochemical (Oxygen) |
Outputs | 16 relays user selectable SPCO (zone selection for any sensor) |
Relay 1 pre-set – Common low alarm | |
Relay 2 pre-set – Common high alarm | |
Relay 3 pre-set – Common over-range alarms | |
Relay 17 pre-set – Common fault alarm, SPCO relay | |
Relay 18 pre-set – Mains fail, SPCO relay normally energized | |
All volt-free relay contacts rated 230V ac @ 5A |
MM1000 Oxygen Sensor
Sensor Cable | 4-core 1.5mm² (min) screened and armoured |
Contains: 2 x 24V dc power 2 x RS485 serial communications | |
Cable Type | Marine approved, internal screen and overall braiding |
Sensor cables terminating at control unit | |
Environmental | Metal control unit (standard) – IP65 |
Operating temperature -40 to +50ºC | |
Humidity 0 to 95% RH | |
Miscellaneous | Enclosure cable entry – typically bottom via M20 glands |
Alarm relays – automatic inhibit during service periods |
MM2000 Pressure Sensor
Pressure Range | -1000 to +3000 mmWg |
Material | Stainless Steel |
Connection Thread | 1/2 inch BSP parallel |
Power Supply | 10 to 30V dc |
Signal Output | 4~20mA, 2 wire system |
Accuracy | ≥ 0.5% of span |
Operating Temperature | -30 to +150ºC |
Ex Protection | ATEX categories M1, M2, 1G, 1D, 1/2G, 1/2D, 2G, 2D |
You can request the necessary certificates, documentation, instructions and user guide for Martek Marine VECSAFE using the special form.
You can buy Martek Marine VECSAFE in Latvia at a favourable price in «OLIL SIA» by leaving a request on the website, by phone +371 672 70580 or by email olil@olil.lv. Martek Marine VECSAFE price are subject to change depending on exchange rates. We deliver instruments by transport companies in Latvia, Estonia and Lithuania. Worldwide shipping to Europe, Asia, Africa, North and South America available on request.