Products not found
The Series 3400 Smart Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART® Communication. The Series 3400 is capable of being configured with the zero and span buttons (a field calibrator is not required for configuration). The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3400 can be configured to be ATEX or IECEX approved for use in hazardous (classified) locations. The rangeability allows the smart transmitter to be configured to fit most applications.
Retail price from $1121,95
Available
The Series 616KD Differential Pressure Transmitters with One-Touch® Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.
Retail price from $93.1
Available
Series RSM Room Status Monitor is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. The Series RSM can be configured to monitor positive or negative pressure in protected environments and hospital isolation rooms per CDC guidelines. The RSM is a complete system with a graphic user interface which enables access to pressure, security, calibration, and alarm setup. The RSM has a NEMA 1 (IP20) rated fire retardant plastic for indoor applications.
Retail price from $1822,,64
Available
Series 677B Differential Pressure Transmitters are designed to measure pressures as low as 0.1 in w.c. with ±0.4% accuracy. Use Series 677B for building energy management systems, environmental pollution control, oven pressurization, lab and fume hood control, HVAC and VAV applications. The transmitter features 15 psid overpressure, reverse polarity protection and EMI/RFI protection. Internal regulation permits use with unregulated DC power supplies. The NEMA 4 housing allows for versatile mounting locations and integral mounting tabs simplify installation.
Retail price from $385
Available
- SMART Transmitter 4-20mA + HART protocol
- Span limits : 0 to 30 bar
- Rangeability : 16:1
- Accuracy : 0.2%
- Power supply 10.5 to 45VDC
- Process wetted parts material 316L stainless steel
- Process connection direct
- Burnout according NAMUR NE43 recommandations
- Long term stability : +/- 0.1% of maximum span / 10years
Options: Local analog or digital indicator, Intrinsically safe version, Explosion proof version, FM, CSA and IECEx certification, Stainless Steel electronic housing.
price by request
Available
Pressure transmitter with local readout DS 4” (100mm)
✔ Double elastic element: Bourdon tube and electronic sensor.
✔ Vibrations and pulsations proof.
✔ EMC immunity: as per EN 61326.
✔ Wiring: shieldless cable.
✔ Calibration: adjustable.
price by request
Available
- SMART Transmitter 4-20mA + HART protocol
- Span limits : 0.1 KPa to 20000KPa
- Rangeability : 100:1
- Accuracy : 0.065% (0.04% as an option)
- Power supply 10.5 to 45VDC
- Process wetted parts material : Inox 316L, Hastelloy, Monel, Tantalum,
- Process connection : ¼”-18NPT (oval flanges on request)
- Burnout according NAMUR NE43 recommandations
- Long term stability : +/- 0.1% of maximum span / 10years
Options: Local analog or digital Indicator, Intrinsically safe version, Explosion proof version, FM, CSA and IECEX certification.
» Stainless Steel electronic housing
price by request
Available
Pressure transmitter with local readout, for homogenizer DS 4” (100mm)
✔ Construction and finishing: as per 74-06.
✔ Sterilization temperature: +302°F (+150°C) max.
✔ Double elastic element: Bourdon tube and electronic sensor.
✔ Vibrations and pulsations proof.
✔ EMC immunity: as per EN 61326.
✔ Calibration: adjustable.
✔ Full traceability
price by request
Available
- SMART Transmitter, -20mA + HART protocol
- Span limits: 0 to 100 bar
- Rangeability : 100:1
- Accuracy : 0.2% (0.1% as an option)
- Power supply 10.5 to 45VDC
- Process wetted parts material: 316L st. st., Hastelloy, Monel, Tantalum,
- Process connection ¼”-18NPT (oval flanges on request)
- Burnout according NAMUR NE43 recommandations
- Long term stability : +/- 0.1% of maximum span / 10years
Options: Local analog or digital indicator, Intrinsically safe version, Explosion proof version, FM, CSA and IECEx certification, Stainless Steel electronic housing
price by request
Available
Pressure transmitter for industrial application, compact design, ceramic sensor
The ST1 model is a compact electronic transmitter with ceramic sensor for air, industrial and technical gases, water and oil.
price by request
Available
Series 645 Wet/Wet Differential Pressure Transmitters are designed for use with compatible gases and liquids which can be applied to both the pressure and reference ports. Quick response capacitance sensor delivers a 4 to 20 mA output signal proportional to differential pressure with ±.25% accuracy. The Series 645 transmitters are ideal for process control, filter condition monitoring, refrigeration equipment, pump speed control, HVAC equipment, and liquid level measurement. For ease of installation and maintenance, order optional 3-valve manifold assembly. Bleed ports allow for total elimination of air in the line and pressure cavities.
price by request
Available
GE-923-Ex Air Differential Pressure transmitter is produced with magnetic sensing technology, pressure ranges from 0~±25Pa at up to 10000KPa. Available with Unidirectional and bidirectional pressure ranges, and air velocity, with LCD display screen, 4-20mA output or RS-485 signal.
Retail price from $1279
Available
Pressure transmitter for industrial application, compact design, piezoresistive sensor
The ST2 model is a compact electronic transmitter with piezoresistive sensor with excellent linearity, for air, industrial and technical gases, water, oil and process media compatible with AISI 316.
price by request
Available
Pressure transmitter for industrial application, piezoresistive sensor
The ST9 model is an electronic transmitter with piezoresistive sensor with excellent linearity, with adjustable zero and span, for air, industrial and technical gases, water, oil and process media compatible with AISI 316. When assembled to diaphragm seals, it measures the pressure of corrosive, highly viscous and hot fluids.
price by request
Available
The Series 3500 Smart Differential Pressure Transmitter is a microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART® Communication. The Series 3500 is capable of being configured for differential pressure or level applications with the zero and span buttons. A field calibrator is not required for configuration. The transmitter software compensates for thermal effects, improving performance. EEPROM stores configuration settings and stores sensor correction coefficients in the event of shutdowns or power loss. The Series 3500 can be configured to be ATEX or IECEX approved for use in hazardous (classified) locations. The rangeability allows the smart transmitter to be configured to fit any application.
price by request
Available
Pressure transmitter for industrial application, ceramic sensor
The ST18 model is an electronic transmitter with ceramic sensor, with adjustable zero and span, for air, industrial and technical gases, water and oil. When assembled to diaphragm seals, it measures the pressure of corrosive, highly viscous and hot fluids.
price by request
Available
Piezoresistive pressure transmitter flush diaphragm, double sealing, 0,5% accuracy
price by request
Available
Pressure transmitter flush diaphragm
✔ Wetted parts: st.st.AISI 316L.
✔ Process fluid temperature: up to 300°F (+150°C).
✔ EMC emission and immunity: as per EN 61326.
✔ Wiring: shieldless cable.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Pressure transmitter for food industry and sanitary applications
✔ Construction and finishing: as per 74-06.
✔ Wetted parts: AISI 316L st.st.
✔ EMC emission and immunity: as per EN 61326.
✔ Calibration: adjustable.
✔ Full traceability
price by request
Available
Intrinsically safe pressure transmitter, ATEX version
✔ Zones : 0, 1, 2, 20, 21, 22
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Intrinsically safe pressure transmitter, ATEX version
✔ Zones : 0, 1, 2, 20, 21, 22
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Flush diaphragm pressure transmitter, intrinsecally safe ATEX version
✔ Zones : mining, 0, 1, 2, 20, 21, 22
✔ Wetted parts: st.st.AISI 316L.
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
The Series ISDP Differential Pressure Transmitter provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. The ISDP offers simplified programming via a Menu key that enables the user to select: security level; English or Metric engineering units; pressure, velocity or flow operation, K-factor for use with various Pitot tubes and flow sensors, circular or rectangular duct size for volumetric flow operation plus many more. The Series ISDP Differential Pressure Transmitter is powered on its two wire loop with 10-35 VDC via its integral M-12 four pin male connector. The ISDP provides a 0.5% full scale accuracy on ranges from 0.25″ w.c. to 100″ w.c. as well as bi-directional models up to 10″ w.c. These features make the Series ISDP Differential Pressure Transmitter the ideal instrument for monitoring pressures or air flows in hazardous zones having a Class I Div. I Groups A, B, C, D; Class II Div. I Groups E, F, G; Class III Div. I ratings.
price by request
Available
Intrinsically safe pressure transmitter, for food industry and sanitary applications, ATEX version
✔ Construction and finishing: as per 74-06 SSI
✔ Zones : 0, 1, 2, 20, 21, 22
✔ Wetted parts: AISI 316L st.st.
✔ EMC emission and immunity: as per EN 61326
✔ Calibration: adjustable
✔ Full traceability
price by request
Available