Products not found
The Series 616KD-LR Differential Pressure Transmitter is designed for simplicity, making it the ideal choice for installers and maintenance professionals. These low range instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary/
Retail price from $119.6
Available
Our low cost Series 668 Differential Pressure Transmitter is capable of measuring low pressures with a ±1% accuracy – ideally suited for proper building pressurization and air flow control. Transmitters can withstand up to 10 psig overpressure with no damage to the unit. Variable capacitance sensor design provides excellent sensitivity and long-term stability. Compact, lightweight design makes installation simple and easy. Units also feature reverse-polarity protection
Retail price from $240.1
Available
Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25 with the Series 616W Differential Pressure Transmitter. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. The LCD display allows local indication of pressure.
Retail price from $323.45
Available
The Series 629HLP Differential Pressure Transmitters are suitable for measuring over-pressure, under-pressure, and differential pressure in compatible gases and liquids with 1% accuracy. The 629HLP is suitable for all measuring tasks in commercial, industrial or sanitary applications. Its single sensor design allows it to measure small increment pressure changes, and converts them to a linear analog output signal from 4 to 20 mA or 0 to 10 VDC.
Retail price from $419.1
Available
Piezoresistive pressure transmitter flush diaphragm, double sealing, 0,5% accuracy
price by request
Available
Pressure transmitter flush diaphragm
✔ Wetted parts: st.st.AISI 316L.
✔ Process fluid temperature: up to 300°F (+150°C).
✔ EMC emission and immunity: as per EN 61326.
✔ Wiring: shieldless cable.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Pressure transmitter for food industry and sanitary applications
✔ Construction and finishing: as per 74-06.
✔ Wetted parts: AISI 316L st.st.
✔ EMC emission and immunity: as per EN 61326.
✔ Calibration: adjustable.
✔ Full traceability
price by request
Available
Intrinsically safe pressure transmitter, ATEX version
✔ Zones : 0, 1, 2, 20, 21, 22
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Intrinsically safe pressure transmitter, ATEX version
✔ Zones : 0, 1, 2, 20, 21, 22
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
Flush diaphragm pressure transmitter, intrinsecally safe ATEX version
✔ Zones : mining, 0, 1, 2, 20, 21, 22
✔ Wetted parts: st.st.AISI 316L.
✔ EMC emission and immunity: as per EN 61326.
✔ Case: with ventilation device.
✔ Calibration: adjustable.
price by request
Available
The Series ISDP Differential Pressure Transmitter provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. The ISDP offers simplified programming via a Menu key that enables the user to select: security level; English or Metric engineering units; pressure, velocity or flow operation, K-factor for use with various Pitot tubes and flow sensors, circular or rectangular duct size for volumetric flow operation plus many more. The Series ISDP Differential Pressure Transmitter is powered on its two wire loop with 10-35 VDC via its integral M-12 four pin male connector. The ISDP provides a 0.5% full scale accuracy on ranges from 0.25″ w.c. to 100″ w.c. as well as bi-directional models up to 10″ w.c. These features make the Series ISDP Differential Pressure Transmitter the ideal instrument for monitoring pressures or air flows in hazardous zones having a Class I Div. I Groups A, B, C, D; Class II Div. I Groups E, F, G; Class III Div. I ratings.
price by request
Available
Intrinsically safe pressure transmitter, for food industry and sanitary applications, ATEX version
✔ Construction and finishing: as per 74-06 SSI
✔ Zones : 0, 1, 2, 20, 21, 22
✔ Wetted parts: AISI 316L st.st.
✔ EMC emission and immunity: as per EN 61326
✔ Calibration: adjustable
✔ Full traceability
price by request
Available
Multifunction digital pressure instrument: gauge, transmitter, switch
✔ Rangeability 1:5
✔ 0,1% accuracy
✔ 5 digit with analog bar graph
✔ 2 alarms
✔ Peak values measurement
✔ Ambient temperature measurement
price by request
Available
AE10 is a series of high performance compact pressure transmitter by using ASIC signal conditioning chip and dryceramic capacitive pressure sensor. It has features of anti-corrosion, anti-wear, shock resistance and vibration resistance. lts anti-overload capacity is 5~10 times of therange, completely solved poor overload in small range of other sensors.
price by request
Available
- SMART Transmitter 4-20mA + HART protocol
- Span limits : -1 to 100 bar
- Rangeability : 16:1
- Accuracy : 0.1%
- Power supply 10.5 to 45 VDC
- Process wetted parts material 316L stainless steel
- Process connection direct
- Burnout signal according NAMUR NE43 recommandations
- Long term stability : +/-0.1% of maximum span / 10years
Options: Local analog or digital Indicator; Intrinsically safe version; Explosion proof version; FM, CSA and IECEx certification; Stainless Steel electronic housing
price by request
Available
- SMART Transmitter 4-20mA + HART protocol
- Span limits : 0 to 30 bar
- Rangeability : 16:1
- Accuracy : 0.2%
- Power supply 10.5 to 45VDC
- Process wetted parts material 316L stainless steel
- Process connection direct
- Burnout according NAMUR NE43 recommandations
- Long term stability : +/- 0.1% of maximum span / 10years
Options: Local analog or digital indicator, Intrinsically safe version, Explosion proof version, FM, CSA and IECEx certification, Stainless Steel electronic housing.
price by request
Available
Pressure transmitter with local readout DS 4” (100mm)
✔ Double elastic element: Bourdon tube and electronic sensor.
✔ Vibrations and pulsations proof.
✔ EMC immunity: as per EN 61326.
✔ Wiring: shieldless cable.
✔ Calibration: adjustable.
price by request
Available
- SMART Transmitter 4-20mA + HART protocol
- Span limits : 0.1 KPa to 20000KPa
- Rangeability : 100:1
- Accuracy : 0.065% (0.04% as an option)
- Power supply 10.5 to 45VDC
- Process wetted parts material : Inox 316L, Hastelloy, Monel, Tantalum,
- Process connection : ¼”-18NPT (oval flanges on request)
- Burnout according NAMUR NE43 recommandations
- Long term stability : +/- 0.1% of maximum span / 10years
Options: Local analog or digital Indicator, Intrinsically safe version, Explosion proof version, FM, CSA and IECEX certification.
» Stainless Steel electronic housing
price by request
Available
Pressure transmitter with local readout, for homogenizer DS 4” (100mm)
✔ Construction and finishing: as per 74-06.
✔ Sterilization temperature: +302°F (+150°C) max.
✔ Double elastic element: Bourdon tube and electronic sensor.
✔ Vibrations and pulsations proof.
✔ EMC immunity: as per EN 61326.
✔ Calibration: adjustable.
✔ Full traceability
price by request
Available
- SMART Transmitter, -20mA + HART protocol
- Span limits: 0 to 100 bar
- Rangeability : 100:1
- Accuracy : 0.2% (0.1% as an option)
- Power supply 10.5 to 45VDC
- Process wetted parts material: 316L st. st., Hastelloy, Monel, Tantalum,
- Process connection ¼”-18NPT (oval flanges on request)
- Burnout according NAMUR NE43 recommandations
- Long term stability : +/- 0.1% of maximum span / 10years
Options: Local analog or digital indicator, Intrinsically safe version, Explosion proof version, FM, CSA and IECEx certification, Stainless Steel electronic housing
price by request
Available
Pressure transmitter for industrial application, compact design, ceramic sensor
The ST1 model is a compact electronic transmitter with ceramic sensor for air, industrial and technical gases, water and oil.
price by request
Available
Series 645 Wet/Wet Differential Pressure Transmitters are designed for use with compatible gases and liquids which can be applied to both the pressure and reference ports. Quick response capacitance sensor delivers a 4 to 20 mA output signal proportional to differential pressure with ±.25% accuracy. The Series 645 transmitters are ideal for process control, filter condition monitoring, refrigeration equipment, pump speed control, HVAC equipment, and liquid level measurement. For ease of installation and maintenance, order optional 3-valve manifold assembly. Bleed ports allow for total elimination of air in the line and pressure cavities.
price by request
Available
Pressure transmitter for industrial application, compact design, piezoresistive sensor
The ST2 model is a compact electronic transmitter with piezoresistive sensor with excellent linearity, for air, industrial and technical gases, water, oil and process media compatible with AISI 316.
price by request
Available
Pressure transmitter for industrial application, piezoresistive sensor
The ST9 model is an electronic transmitter with piezoresistive sensor with excellent linearity, with adjustable zero and span, for air, industrial and technical gases, water, oil and process media compatible with AISI 316. When assembled to diaphragm seals, it measures the pressure of corrosive, highly viscous and hot fluids.
price by request
Available