Products not found
The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries.
Retail price from 384,65 €
Available
- Poison Resistant (PRP) and High Temperature (HT) versions
- 3, 4 or 5 wire connection
- Stainless steel sensor body
- Complete range of accessories
- Fast response time
- Excellent performance cost ratio
- Safety Integrity Level – SIL 2
price by request
Available
Battery Powered Exhaust Gas Analyser with Graphic Display
Retail price from 3 155,25 €
Available
The TXP-SVT Signal Validation Tool simulates data transmission and reception of TracXP Wireless devices. A single SVT is a helpful device when setting up communication between another Wireless device, such as the TXP-WTA Wireless Transmitter, TXP-WCR Wireless Control Panel, or TXP-WAR Wireless Alarm Relay.
price by request
Available
Advanced, easy-to-use, 4-gas monitor for worker protection in hazardous environments. The ergonomic PM400 diffusion gas monitor simultaneously detects up to four gases, including hydrogen sulfide (H 2 S), carbon monoxide (CO), oxygen (O2 ) and combustibles (LEL). AimSafety’s PM400 is easy to use and delivers continuous visibility of gas concentrations for faster, more informed decisions that help protect workers and operational assets which can increase revenue and productivity.
price by request
Available
CM-6: Low Voltage (12 to 24 VAC or 12 to 32 VDC)/CM-12: Line Voltage (100-240 VAC)
The CM-6/12 detects Carbon Monoxide (CO) in commercial facilities such as parking garages, boiler rooms, etc. It can be used as a stand-alone detector and controller and as an analog transducer for use with Macurco control panels and other systems.
price by request
Available
All ALTAIR 2X Gas Detectors
- Incorporate proven XCell sensor technology
- Enhance worker safety, compliance and traceability
- Minimize cost of ownership
- Demonstrate rugged durability
price by request
Discontinued
Combining innovation & ease of use the AUTO600 Portable Diesel Smokemeter is designed to meet official test standards.
Retail price from 4 267,94 €
Available
The TracXP TXP-SDA Sample Draw Accessory is designed to pull a gas sample from limited access or hostile environment applications where typically fixed gas detectors can not be installed. The TXP-SDA, coupled with our TXP-T40 transmitter, is ideally suited for applications such as tank headspace, ducts, vessels, wet wells, sumps, confined spaces, storage bins, cabinets, and other challenging applications where sensors can not typically be directly installed.
price by request
Available
Advanced portable single-gas, personal monitor for Carbon Dioxide
- Dual button operation
- Event logging
- Data logging
- Easy-to-read LCD display
price by request
Available
CD-6MC: Low Voltage (12 to 24 VAC or 12 to 32 VDC)/CD-12MC: Line Voltage (100-240 VAC)
The CD-6/12MC monitor detects Carbon Dioxide (CO2) in the beverage and food industries, refrigeration, welding, greenhouses, pharmaceutical, and other chemical processing or other commercial applications, as well as providing automatic fan control to help maintain acceptable levels of gas. Can be used as a stand-alone detector and controller and as an analog transducer for use with the DVP-120 and other systems.
price by request
Available
- Unit detects O2, ClO2, HCN and PH3
- Gas concentration (chlorine dioxide, hydrogen cyanide and phosphine) or percent oxygen displayed on a large, clear, backlit LCD
- Automatically records the last 50 alarm/test events while simultaneously recording peak gas readings or low O2 readings every three minutes in a periodic data log
- Rubberized armor housing and one-button operation for maximum durability and simplicity
- Easy alarm check, bump check, fresh air zero, and calibration
price by request
Available
KANE-AQA IAQ analyser & appliance tester with KANE LINK
Retail price from 808,87 €
Available
The TXP-FDE UV/IR-HD detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation.
price by request
Available
Two-year disposable portable single-gas monitors for CO, H2S, O2, NH3, SO2, NO2, or H2.
- Visible Calibration Status
- Single Button Operation
- Rugged, High Visual Housing
- Easy-To-Read LCD Display
price by request
Available
The CD-6G is a low-voltage monitor providing automatic fan control to help maintain acceptable levels of Carbon Dioxide (CO2) in greenhouses, the beverage and food industry, refrigeration, welding, pharmaceutical, and other chemical processing or other commercial applications. It can be used as a stand-alone detector and controller and as an analog/digital transducer for use with the DVP-120 and DVP-1200 series and other systems. The monitor has a high range of 0-5% by vol. (0-50,000PPM) with a recommended coverage area of 900 – 5000 sq. ft.
price by request
Available
- Sensor options for CO, H2S, and O2
- Patented electrochemical sensors and MSA-built button sensors
- Stainless steel and solid electrolyte construction virtually eliminate sensor leakage
- Automatically records the last 25 alarm/test events and can communicate data by connecting to MSA Link via built-in IR communication port
- No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarm
- Rubberized armor housing and one-button operation for maximum durability and simplicity
price by request
Available
HVACR analyser – Heating, Cooling, Refrigeration & IAQ
Retail price from 1 481,72 €
Available
Vecsafe monitors oxygen and pressure levels in the Vapour Emission Control Systems (VECS). Each vapour line is monitored during loading operations for any over or under-pressurisation or an increase in oxygen levels approaching 8% volume in compliance with USCG and IMO legislation.
price by request
Available
The TXP-FDE UV/IR detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation.
price by request
Available
