Products not found
The TracXP TXP-T40 transmitter is a highly configurable fixed gas detector supporting single or dual sensor applications in Class 1 Division 1 or Class 1 Division 2 environments. Local and remote sensor options allow the TXP-T40 to adapt to a wide variety of industrial applications.
price by request
Available
CX-6: Low Voltage (12 to 24 VAC or 12 to 32 VDC)/CX-12: Line Voltage (100-240 VAC)
The CX-6/12 detects Carbon Monoxide (CO) and Nitrogen Dioxide (NO2) in commercial facilities such as parking garages, loading docks, etc. It can be used as a stand-alone detector, controller, and as an analog transducer for use with Macurco control panels and other systems
price by request
Available
The TracXP TXP-SDA Sample Draw Accessory is designed to pull a gas sample from limited access or hostile environment applications where typically fixed gas detectors can not be installed. The TXP-SDA, coupled with our TXP-T40 transmitter, is ideally suited for applications such as tank headspace, ducts, vessels, wet wells, sumps, confined spaces, storage bins, cabinets, and other challenging applications where sensors can not typically be directly installed.
price by request
Available
CX-6-NO2: Low Voltage (12 to 24 VAC or 12 to 32 VDC) | CX-12-NO2: Line Voltage (100-240 VAC)
The CX-6-NO2 /CX-12-NO2 detects Nitrogen Dioxide (NO2) in commercial facilities such as parking garages, loading docks, etc. It can be used as a stand-alone detector, controller, and as an analog transducer for use with Macurco control panels and other systems
price by request
Available
The TXP-FDE UV/IR-HD detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation.
price by request
Available
CX-6-CO: Low Voltage (12 to 24 VAC or 12 to 32 VDC)/CX-12-CO: Line Voltage (100-240 VAC)
The CX-6-CO/CX-12-CO detects Carbon Monoxide (CO) in commercial facilities such as parking garages, loading docks, etc. It can be used as a stand-alone detector, controller, and as an analog transducer for use with Macurco control panels and other systems
price by request
Available
The TXP-FDE UV/IR detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation.
price by request
Available
Provides Carbon Monoxide Gas Detection in residential, multi-family. Options available:
- CM-E1: Rectangle Housing
- CM-E1-RF: Round Flush Mount
- CM-E1-RS: Round Surface Mount
price by request
Available
Flame simulators are often used by industry to perform detector testing during commissioning and periodic system testing. The TXP-FDE simulators are inexpensive, lightweight and simple to use. The modern ergonomic design, with alignment markers, allows accurate, fast and convenient detector performance verification. Suitable for use in hazardous areas, the TXP-FDE flame simulators can be used at distances of up to 23 feet (7 meters) from the detector.
price by request
Available
CM-6: Low Voltage (12 to 24 VAC or 12 to 32 VDC)/CM-12: Line Voltage (100-240 VAC)
The CM-6/12 detects Carbon Monoxide (CO) in commercial facilities such as parking garages, boiler rooms, etc. It can be used as a stand-alone detector and controller and as an analog transducer for use with Macurco control panels and other systems.
price by request
Available
The TracXP TXP-FDE IR3-HD triple IR flame detector ensures the highest immunity to false alarms and provides an ultra-fast response, high performance, and reliable detection of all types of hydrocarbon fires (visible and non-visible).
The IR3-HD’s high definition camera allows clear imaging of fire and personnel at 100ft (30m). Video recording of one-minute pre-event and up to three minutes post-event provides visual documentation of the event.
price by request
Available
CD-6MC: Low Voltage (12 to 24 VAC or 12 to 32 VDC)/CD-12MC: Line Voltage (100-240 VAC)
The CD-6/12MC monitor detects Carbon Dioxide (CO2) in the beverage and food industries, refrigeration, welding, greenhouses, pharmaceutical, and other chemical processing or other commercial applications, as well as providing automatic fan control to help maintain acceptable levels of gas. Can be used as a stand-alone detector and controller and as an analog transducer for use with the DVP-120 and other systems.
price by request
Available
The TXP-FDE IR3-H2-HD detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation
price by request
Available
The CD-6G is a low-voltage monitor providing automatic fan control to help maintain acceptable levels of Carbon Dioxide (CO2) in greenhouses, the beverage and food industry, refrigeration, welding, pharmaceutical, and other chemical processing or other commercial applications. It can be used as a stand-alone detector and controller and as an analog/digital transducer for use with the DVP-120 and DVP-1200 series and other systems. The monitor has a high range of 0-5% by vol. (0-50,000PPM) with a recommended coverage area of 900 – 5000 sq. ft.
price by request
Available
The TXP-FDE IR3-H2 detects fires and explosions extremely quickly allowing mitigation steps to be initiated more rapidly and limit event escalation.
price by request
Available
- Easy installation to 4×4 electrical boxes via mud plate
- User selectable settings (Default to industry standards) via two button interface
- 3 – 2A SPDT relays to control relay to control fans, valves, louvers, horn and strobes
- LED display to easily show gas concentrations
- End of life notification
- Field calibration kits available
price by request
Available
The TracXP TXP-FDE IR3 triple IR flame detector ensures the highest immunity to false alarms and provides an ultra-fast response, high performance, and reliable detection of all types of hydrocarbon fires (visible and non-visible). The detector addresses slow-growing fires as well as the fast eruption of fire using improved triple IR (IR3) technology.
price by request
Available
The TracXP TXP-C64 controller provides alarm and display functions for up to 64 inputs simultaneously. Economic configuration and/or expansion of the system is accomplished with 16, 32, 48, or 64-channel display modes and 16-channel I/O modules, allowing the TXP-C64 to accommodate changing applications within your facility.
price by request
Available
- NEMA 4X enclosure
- LCD readout displays engineering units, bar graphs or 30 minute trends
- LED’s indicate alarm and fault status
- 2 programmable SPDT relays for warning, high alarm, horn and fault conditions
- RS-485 Modbus® slave serial port
- 6 programmable 5A relays (optional)
- “Cal Mode” offers pushbutton zero and span calibration for direct sensor input applications
price by request
Available
The TracXP TXP-C16X is a multi-channel control panel that provides signal conditioning, simultaneous real-time display, and alarm events for up to 16 input channels. The controller modules are designed in 8-channel options allowing the TXP-C16X to be set up as an 8 to 16-channel device to meet a wide variety of applications.
price by request
Available
The Alarm Notification Assembly is a flexible, cost-effective alarm status annunciator for general-purpose applications. The TXP-ANA offers optional strobe light configurations of one to four strobes, standard 99 dB or optional 120 dB horn, optional configurable Hush/Silence, and optional wireless functionality with the TXP Wireless System.
price by request
Available
Indoor Air Quality Series
- Easy installation to single gang box
- Aesthetically pleasing- flush mount or surface options
- User selectable settings via two button interfac
- 0.5A configurable (N.O. or N.C.) dry contact relay to engage ventilation
- Analog or digital outputs versions to send values to BMS
- LCD display
price by request
Available
The GD-6/12 detects combustible gas concentrations (Methane CH4 (natural gas), Propane C3H8, or Hydrogen H2) in parking garages, battery rooms, maintenance facilities, and other locations that require combustible gas detection as well as providing automatic feedback.
price by request
Available