Products not found
Temperature sensor suitable for measurement of pipes and shafts. Rigid sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft.
- radiator enhancing surface of heat reception with band clamp for mounting on a pipeline DN 15÷200 mm
- insulated hot junction SO
- material: brass
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range: -40÷550ºC TC
- sensing element: J thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor applied in industrial pipelines, pressure and other tanks for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.
- Temperatura range -40÷600ºC TC
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type MA IP54 – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Available
Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire.
- thermocouple wire: 2×0,22 mm2
- hot junction: insulated SO, grounded SP
- material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement in hard-to-reach places and in applications requiring the use of flexible sensors with small diameters, and low thermal inertia.
- performance with head NA, IP65
- material stainless steel 1.4541 and INCONEL
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 1/2G Ex ia IIC T6 II 1/2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: stainless steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Available
Sensor suitable for temperature measurements, primarily in industrial pressure tanks, in all these places where mounting of a threaded process connection would be problematic. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert guarantees an excellent connection with the bottom of the sensor thermowell.
- Temperatura range 0÷540ºC TC
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the thermowell.
- Temperatura range -40÷550ºC TC
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Available
Sensor suitable for temperature measurement of enclosures, movable parts and injection moulds.
- flat (P) or tapered (S) tip
- quick disconnect SZ with thread (standard – M12x1)
- thread K (standard – M12x1)
- material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for temporary measurement of liquids, semifluid masses or loose materials. Portable temperature meters intended for cooperation with resistance sensors are used to read the results of measurement.
- PVC hand grip, max. operating temperature 80°C
- stainless steel 1.4541 and INCONEL
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M1 Ex ia (with connection head N1) II 1/2G Ex ia IIC T6 II 1/2D Ex ia IIIC T85°C cable gland II 2GD Ex eb IIc, Ex ta IIIC (for the cable 5÷10mm)
- process connection with G1/2 or M20x1,5 thread
- connection head type aluminium XE-DANA (S1-standard), XE-DAND (S2),
XE-DANAW (W1), XE-DANDW (W2) or stainless XE-BE (N1), IP65 - sheath material: acid-resistant steel 1.4541
- cable gland ATEX II GD IP65 (for cable 5÷10 mm)
- Exi acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell.
- Temperatura range -40÷550ºC TC
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor applied in industrial pipelines, pressure tanks and different industrial devices for temperature measurement of liquids and gases. Sensing element is placed directly in the sheath.
- Temperatura range -40÷700ºC TC
- sensing element: K thermocouple
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Available
Sensor suitable for temperature measurement in district heating substations. Sensor with welded connector is applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.
- flexible protection hose, stainless,
- fiberglass insulation, metallic overbraid
- material: stainless steel 1.4541
price by request
Available
Thermocouple sensor in additional sheath suitable for temperature measurement of liquids, semifluid masses or loose materials. Additional hardening layer on the sheath tip increases its abrasion resistance.
- PVC hand grip, max. operating temperature 80°C
- three-stepped sheath, at length 200 mm covered with tungsten carbide to enhance
abrasion resistance - material: stainless steel 1.4541
price by request
Available
Temperature sensor suitable for measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. Temperature sensor has ATEX approval for application in hazardous area: II 1/2G Ex ia IIC T6 II 1/2D
- welded threaded connector
- thermocouple sensor with insulated hot junction
- sheath material:stainless steel 1.4541
- Exi acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the the bottom of the sensor thermowell.
- Temperatura range -40÷900ºC K
- sensing element: K thermocouple
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor with low thermal inertia suitable for temperature measurement of processes, where fast response to temperature change of the measured medium is needed. Sensing element is placed directly in the sheath.
- Temperatura range -40÷700ºC TC
- sensing element: K thermocouple
- connection head type MA IP54, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Available
Sensor suitable for temperature measurement in district heating substations. Applicable also for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of resistor placed in the thin-walled acid-resistant sheath connected to flexible lead protected with corrugated steel pipe.
- flexible protection hose, stainless,
- round (K), fl at (P), tapered (S) tips
- bayonet fi tting with connector – nickel-plated brass
- material: stainless steel 1.4541
price by request
Available
Mineral insulated sensor with strengthened sheath suitable for measurement of liquids, semifluid masses or loose materials with high density or flow in conditions of great vibrations.
- other lead wire insulation types: tefl on, armour, fi berglass
- mineral insulated thermocouple ø4,5 mm, with sleeve and nut M14x1,5 for sensor mounting
- materia: stainless steel 1.4541 and INCONEL
price by request
Available
Temperature sensor suitable for measurement of liquid and gaseous media. It has a replaceable measuring insert adequate for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the bottom of the sensor thermowell. Temperature sensor has ATEX approval for application in hazardous area: I M2 Ex d I Mb (with connection head NS) II 2G Ex d IIC T6 Gb II 2D Ex t IIIC T85ºC Db IP66
- process connection with G1/2 or M20x1,5 thread
- aluminium: XD-AD (AS1 – one cable gland, AS2 – two cable glands)
- aluminium, cover with window: XD-ADwin (AS3 – one cable gland, AS4 – two cable glands)
- stainless steel: XD-SD (NS1 – one cable gland, NS2 – two cable glands)
- sheath material: acid-resistant steel 1.4541
- cable gland: ATEX II 2 GD; ATEX I M2; IP 66÷68, cable diameter: 3÷14,3 mm (standard 6,1÷11,7)
- Exd acc. to ATEX
price by request
Available
This sensor is used for temperature measurement of liquid and gaseous media. The temperature sensor design (replaceable measuring insert) is suitable for various industrial applications. Replacement of the measuring insert does not cause the technological installation damage. Spring-loaded insert ensures an excellent connection with the the bottom of the sensor thermowell.
- Temperatura range -40÷550ºC TC
- process connection with G1/2 or M20x1,5 thread
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
- measuring insert: pipe or mineral insulated version
price by request
Available
Temperature sensor suitable for measurement of industrial processes. Sensing element is placed directly in the sheath.
- Temperatura range -40÷600ºC TC
- sensing element: K thermocouple
- connection head type BA IP55, – 40÷100ºC
- sheath material: acid-resistant steel 1.4541
- temperature transmitter can be mounted in a connection head
price by request
Available
- thermocouple solid wire ø0,2 mm with fi berglass insulation
- material: nickel-plated brass
price by request
Available