Acid flow meters

The Series VAT Variable Area Fluoropolymer Flowmeter is ideal for high purity or corrosive liquid applications. This series of flowmeters features a 0 to 10 scale for flow indication. Each unit is individually leak tested to a leak integrity rating of 1 x 10^-7 sccs Helium or better.

This new model, at high performance solutions, both as hardware and software, can be defined as an HI-TEC line, addressed to very demanding customers from the point of view of performance and precision.

Output signal is both analogical and digital; and qualitatively the instrument is very performing, having accuracy <+-0,5% of reading and repeatability of 0,1% r.v.

Asameters model T with flap indicators are good for transparent liquid flow measurement and mounting on horizontal pipe lines.

Flanged sensor has a rugged and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube in stainless steel 304 and the outer tube in carbon steel are welded to provide a hermetic seal. Therefore it’s free from long-term maintenance.
Easy and fast to install and start up.

These Asameters® are a sight flow indicators of liquids in pipelines at any angle and direction of flow.

Wafer sensor has a rugged and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube and the outer tube both in stainless steel are welded together to provide a hermetic seal. Therefore it’s maintenance free and provide a long-term reliability. Easy and fast to install and start up.

UFM ultrasonic flow meter is widely used in the long-term on-line measurement of various liquids, suitable for all dense pipes. The sensor of flow meter is divided into external clamp type, plug-in type and pipe section type, in which the external clamp type and plug-in type can be continuously and uninterrupted flow installation. The main engine can be installed in the indoor, instrument cabinet, the sensor is installed on the pipe, the main engine and sensor are connected by custom cable, the flow rate can be measured, and the ration temperature sensor can realize the heat measurement.

Sensor model DIN, Clamp, Gas or SMS has a sturdy and reliable build. All of its internal components and wiring are isolated from environmental hazards, even the toughest, because the measuring tube and the outer tube both in stainless steel are welded together to provide a hermetic seal. Therefore it’s maintenance free and provide a long-term reliability. It’s available entirely made of stainless steel, also for the housing of the converter.

NBLB target flow meter is a new generation of flow meter developed by our company. It adopts a new force-torque tube-corner conversion mechanism, transfers the angle through the torque tube, then measures the angle through the high precision Hall sensor and outputs the voltage signal corresponding to the flow change and outputs the standard 4 mA~20 mA square (linear) current analog signal. The instrument has the modern popular enclosure design, the shape is beautiful and each working chamber is isolated, uses the non-contact angle measurement technology to avoid the strain sensor force deformation, safe and reliable.

Asameters model C-G…38/39 all made of stainless steel are designed for medium and high flow rates for every kind of gas (mod. C) and liquid (mod. G) also aggressive, at extreme operating and environmental conditions (high pressures and/or low or high temperatures).

MTF variable area flow meter for micro flow can measure tiny liquid or gas, which has the characteristics of stable and reliable measurement and wide application range. The instrument is equipped with a fine-tuning valve to facilitate the user’s setting of a specific flow rate. Instrument is based on the float measurement principle. According to the flow direction of the medium, it can be divided into side in and out, bottom in and out of two types. According to the display mode, it is divided into mechanical pointer type and liquid crystal display with 4-20 mA current output type.

Asameters model C/G …47 _ 50 all made of stainless steel are designed for applications in potentially explosive areas thanks to their flameproof design,  certified ATEX Ex ia IIC T4, T6… Zone 0 and Zone 1 (on request).

MTFC series purge device use micro metal pipe float flow meter and constant current valve to form a purge device, which realizes the steady output of flow measurement and pressure fluctuation.

Asameters model L…38 _ 39 all made of stainless steel are designed for low flow rates with any type of gas or liquid also aggressive, at extreme process and environmental conditions (high pressures and/or low or high temperatures).

LUGB vortex flow meter is a kind of speed flow meter, widely used in petroleum, chemical industry, electric power, light industry, power heating industry. Our company’s vortex flow meter production execution standard is vortex flow sensor (JB/T9249-2015) and verification regulation vortex flow meter (JJG10299-2007).

Asameters® E and N series are rugged flowmeters, suitable for measuring instantaneous flow of any type of fluid (gas and liquid), at temperature and pressure conditions kept within glass resistance limits, in absence of water hammer.

Flow element, also known as differential pressure flow meter, consists of a primary detection piece (flow element) and a secondary device (differential pressure transmitter and flow indicator). Flow element is the most stable and reliable of all flow meters, which has a history of more than 100 years. Its wide applicability, high reliability and accurate accuracy make it widely used in the measurement of gas, liquid and vapor.

Asameters® model 1900 – 1901 – 1903 are instant flowmeters for low flows of any type of fluid (gas and liquid), at temperature and pressure conditions kept within glass resistance limits.They differ among themselves for the nominal length of the reading scale.

LGY compact orifice plate flow meter is composed of flow element, differential pressure transmitter, three-way manifold, temperature sensor and pressure sensor, which can measure liquid, gas, vapor and other medium.

Differential pressure regulators model R880 made of stainless steel 316L, when coupled with Asameters model 1900-1901-1903 in s.s. 316L, can keep flow rate constant in presence of variable inlet pressure (mod. 1911-13-15) or outlet pressure (mod. 1912-14-16).

LGV V-cone flow meter is the second generation inner cone flow meter. It is a good performance differential pressure flow meter developed by Dandong Top Electronics Instrument (Group) Co., Ltd in cooperation with Tianjin University. The unique support and taper angle design enables it to measure the flow rate of various medium such as gas, liquid and vapor under very short straight pipe section conditions.

Orifice Asameters U6, also said kinetic, have the measuring tube connected to the main flange, therefore the reading is made directly on the pipeline. They are suitable for the measurement of large flow of fluids.

LGP balanced flow meter is a flow element developed on the basis of standard orifice plate. Its sensor is a porous disk throttling rectifier mounted on the section of the pipe. Size and distribution of each hole are customized based on test data and become function holes. The balanced flow meter sensor can realize the fluid balance measurement skillfully, obviously reduces the eddy current formation, reduces the dead effect and the fluid kinetic energy loss.

Orifice Asameters D6, also called kinetics, have measuring tube separeted from the main orifice and are ideal for remote installation, when the metering point is not the same of that of reading.