Second generation Micro-Orifice Uniform-Deposit Impactor (MOUDI IITM)
Made in USA. brand TSI, model 120R, 122R, 125R
Fast delivery to Latvia, Estonia and Lithuania. International delivery to Europe, Asia, Africa and other continents available on request
Our warehouse is located in Riga, Latvia.
price by request
Available
Official distributor in Latvia
Time-tested American, European and Asian brands of control and measurent instruments
Special price list for organisations
We offer a significant discount for trade organisations and manufacturing companies
Worldwide shipping on request
We take care of all logistics and customs clearance. Fast delivery to Baltic countries
After-sales service and support
Warranty service and repair, expert assistance in the operation of the instruments
All MOUDI II impactors have the same aerodynamic design as in the original MOUDI impactors that have led to sharp cut characteristics (see Figure 3) and low interstage wall losses.
The rotating versions of the MOUDI II impactors are 2nd generation MOUDI impactors using individual stepper motors embedded in each stage to rotate the collecting substrate for uniform deposition. Power for the stepper motors comes from a single electronic package in the instrument cabinet, with power distributed to the individual motors by miniature flat-ribbon cables. Figure 1 shows a typical rotating stage, and Figure 2 shows a photograph of the stage with the uniform particle deposition on the center circular area.
The Models 120R, 122R and 125R are provided with instrument cabinets that also house the electronics for controlling the pump operation, monitoring and recording the output of the six pressure transducers. These features ensure the high quality of samples collected by the user.
Features and Benefits
Applications
Model 120R (with internal rotation) |
Model 122-R (with internal rotation) |
Model 125-R (with internal rotation) |
|
---|---|---|---|
Impactor Stages | 10 | 13 | 13 |
Flow rate, L/min | 30 | 30 | 10 |
Pressure Drop, kPa (w/o final filter) |
41 | 90 | 90 |
Cut-point diameter, μm | 0.056, 0.10, 0.18, 0.32, 0.56, 1.0, 1.8, 3.2, 5.6, 10, 18 | 0.01, 0.018, 0.032, 0.056, 0.10, 0.18, 0.32, 0.56, 1.0, 1.8, 3.2, 5.6, 10, 18 | 0.01, 0.018, 0.032, 0.056, 0.10, 0.18, 0.32, 0.56, 1.0, 1.8, 3.2, 5.6, 10 |
Dimensions (D x H) or (W x L x H) | 80 x 510 mm (impactor) 210 x 640 mm (cabinet) |
130 x 640mm (impactor ) 235 x 190 x 205 mm (cabinet) |
80 x 510 mm (impactor) 210 x 640 mm (cabinet) |
Weight (total) | 19 kg (42 lb.) | 11 kg (24 lb.) | 14 kg (31 lb.) |
Power (cabinet) | 100–240 VAC, 50–60 Hz, 30 W | 100–240 VAC, 50–60 Hz, 30 W | 100–240 VAC, 50–60 Hz, 30 W |
Vacuum Pump | Carbon Vane, 115 or 230 VAC, 50–60Hz, 0.56 kW | Oil Pump, 230VAC only, 50–60 Hz, 1.5 kW | Oil Pump, 115 or 230VAC, 50–60 Hz, 0.9 kW |
You can request the necessary certificates, documentation, instructions and user guide for TSI 120R, 122R, 125R using the special form.
You can buy TSI 120R, 122R, 125R in Latvia at a favourable price in «OLIL SIA» by leaving a request on the website, by phone +371 672 70580 or by email olil@olil.lv. TSI 120R, 122R, 125R price are subject to change depending on exchange rates. We deliver instruments by transport companies in Latvia, Estonia and Lithuania. Worldwide shipping to Europe, Asia, Africa, North and South America available on request.
See also: Cascade Impactors