+371 672 70580

Mon-Fri: 9:00 - 17:00 LV

Email:

DWYER GSTC carbon monoxide & nitrogen dioxide gas transmitter

The Series GSTC Carbon Monoxide/Nitrogen Dioxide Gas Transmitter monitors the gas concentration in underground parking garages and loading docks. The carbon monoxide transmitter is used to measure the exhaust of gasoline engines, while the nitrogen dioxide transmitter is used for diesel engines. The Series GSTC is compatible with either BACnet or Modbus® communication protocol, allowing the transmitter to be used with almost any building management controller. The GSTC output is communicated over an RS-485 wire via BACnet or Modbus® communication protocol.

			int(4788)
NULL
		

Made in USA. brand DWYER, model GSTC

Fast delivery to Latvia, Estonia and Lithuania. International delivery to Europe, Asia, Africa and other continents available on request
Our warehouse is located in Riga, Latvia.

Retailprice from $250,75

Available

Available

Founded in 1931, DWYER manufactures equipment for measurement, conversion and control – pressure, temperature, level, flow.

Advantages

Official distributor in Latvia

Time-tested American, European and Asian brands of control and measurent instruments

Advantages

Special price list for organisations

We offer a significant discount for trade organisations and manufacturing companies

Advantages

Worldwide shipping on request

We take care of all logistics and customs clearance. Fast delivery to Baltic countries

Advantages

After-sales service and support

Warranty service and repair, expert assistance in the operation of the instruments

Description of DWYER GSTC

To maximize the accuracy of the Series GSTC, the sensor can be field-calibrated using the A-449 remote LCD display. When the sensor reaches the end of its life, the display will indicate that the sensor needs to be replaced. BACnet and Modbus® communication protocol recommend limiting the number of nodes in any segment to 32. Therefore, the transceiver may be rated at one unit load. Fractional loads are also acceptable. The Series GSTC accounts as an eighth of a load on the MS/TP network.

FACTORY CALIBRATED choices are available under “Filter By” on the Ordering tab.

PRODUCT APPLICATIONS

  • Parking Garages
  • Loading Docks
  • Mechanical Room Monitoring

FEATURES

  • Industrial grade replaceable CO or NO2 sensors
  • Field selectable BACnet or Modbus® communication on GSTC models
  • Integral LCD display option
  • Service display tool for set-up and calibration of models without a LCD

Technical specifications of DWYER GSTC

  • Sensor: Field replaceable electrochemical, 4 years typical lifespan.
  • Range: CO: 0 to 500 PPM, NO2: 10 PPM.
  • Output Drift: <5% per year in air.
  • Coverage Area: 5000 to 7500 sq ft typical.
  • Accuracy: CO: 2% FS, NO2: 3% FS, at the time of calibration.
  • Resolution: CO: 1 PPM; NO2: 0.1 PPM.
  • Temperature Limits: -4 to 122°F (-20 to 50°C).
  • Storage Temperature: For best sensor life, 32 to 68°F (0 to 20°C).
  • Humidity Limits: 15 to 90% RH constant; 0 to 99% RH intermittent.
  • Response Time: <45 s to 90% CO, <25 s to 90% NO2.
  • Span and Zero Adjustment: Via pushbutton, using optional A-449 display. Zero only via BACnet or MODBUS® communication protocol.
  • Housing: UV resistant glass filled polycarbonate.
  • Output Signals: BACnet MS/TP, MODBUS® RTU, or MODBUS® ASCII (switch selectable) communication protocol.
  • Power Requirements: 10-36 VDC or isolated 21.6-33 VAC, 5.7 mA @ 24 VDC.
  • Electrical Connection: Removable terminal block, knock outs for conduit fitting.
  • Calibration: Via pushbuttons using A-449 auxiliary display. Span gas concentration is field selectable.
  • Enclosure Rating: IP64.
  • Weight: 1 lb (0.45 kg).
  • Compliance: CE.

How to buy DWYER GSTC

Model Description Price
GSTC-C Carbon Monoxide Transmitter with BACnet & Modbus Communication
$250.75
GSTC-C-D Carbon Monoxide Duct Mount Transmitter with BACnet & Modbus Communication
$319.50
GSTC-C-D-FC Carbon monoxide duct mount transmitter with BACnet & Modbus® communication, includes factory calibration certificate
$355.70
GSTC-C-FC Carbon monoxide transmitter with BACnet & Modbus® communication, includes factory calibration certificate
$294.30
GSTC-C-LCD Carbon Monoxide Transmitter with BACnet & Modbus Communication with Integral LCD Display
$313.70
GSTC-C-LCD-FC Carbon monoxide transmitter with BACnet & Modbus® communication, LCD display, includes factory calibration certificate
$355.70
GSTC-N Nitrogen Dioxide Transmitter with BACnet & Modbus Communication
$441.70
GSTC-N-D Nitrogen Dioxide Duct Mount Transmitter with BACnet & Modbus Communication
$508.55
GSTC-N-D-FC Nitrogen Dioxide duct mount transmitter with BACnet & Modbus® communication, includes factory calibration certificate
$547.05
GSTC-N-FC Nitrogen Dioxide transmitter with BACnet & Modbus® communication, includes factory calibration certificate
$483.60
GSTC-N-LCD Nitrogen Dioxide Transmitter with BACnet & Modbus Communication with Integral LCD Display
$504.65
GSTC-N-LCD-FC Nitrogen Dioxide duct mount transmitter with BACnet & Modbus® communication, LCD display, includes factory calibration certificate
$547.05

Accessories for DWYER GSTC

Model Description Price
A-507 Gas calibration kit adaptor.
$81.50
A-449 Remote display with mini USB display
$68.60
A-506 Replacement Nitrogen Dioxide Sensor for GSTA & GSTC Series
$218.80
A-GSTA-SE Security enclosure.
$18.65
A-505 Replacement carbon monoxide sensor for the Series GSTA, GSTC, & CMT200
$81.50

User Guide and Instruction manual for DWYER GSTC

You can request the necessary certificates, documentation, instructions and user guide for DWYER GSTC using the special form.

You can buy DWYER GSTC in Latvia at a price starting from250,75 $ in «OLIL SIA» by leaving a request on the website, by phone +371 672 70580 or by email . DWYER GSTC price are subject to change depending on exchange rates. We deliver instruments by transport companies in Latvia, Estonia and Lithuania. Worldwide shipping to Europe, Asia, Africa, North and South America available on request.