Products not found
- Series VPA Metering Pumps are air-operated, self-priming, positive displacement type pumps designed to meter precise quantities of liquids.
- The accuracy of the discharge repeatability is approximately 1/2 of 1%.
- The four sizes of pumps available have a single stroke delivery capacity of 7, 10, 32 or 128 liquid ounces.
price by request
Available
Series BSDA/BSDAM Compact, PTFE diaphragm valves in a complete range of materials, sizes and connection types, featuring no wetted metals or elastomers. Includes patented Fail-Dry early warning vent. The ultimate in high-purity on/off control.
price by request
Available
Series GGMU Ultra-pure “zero deadleg” inline isolator in PVDF, Natural Polypro, or PVC with a variety of spigot or sanitary connections and gauge options.
price by request
Available
Series PCWS supply side or Series PCWR return side assemblies simplify piping and provide superior strength. Fully customizable with choice of valves, flow, and pressure controls; pressure and temperature gauges, flowmeters, and virtually any conceivable combination of connection sizes and types.
price by request
Available
Series BSR/BSRM Compact globe-style shut off valves in PVC or Polypro with elastomer seals. Wide range of sizes and connection types. Normally closed operation; ideal alternative to fail safe air-operated ball valves.
price by request
Available
Series SWT Pressure Switch with PTFE diaphragm, for pressures to 150 PSI. Versatile snap-action 16 Amp/3 terminal switch is standard; low deadband 3 Amp switch optional. For 25 Amp switch, consult factory. PVC, CPVC, PP or PVDF.
price by request
Available
Series ECWS supply-side or Series ECWR return side are express-built assemblies in the most popular configurations to simplify piping and provide superior strength. PVC or CPVC construction with EPDM seals and socket connections; the only selection necessary is the flowmeter range on the return side.
price by request
Available
Series HSA Air-operated pinch valve designed for corrosive slurries; long-life EPDMh2 sleeve with a variety of pipe sizes and connection materials.
price by request
Available
Pressure ranges from 30” vacuum to 200 PSI with 4-20 mA output signal and ±0.5% accuracy. Includes POM Gauge Guard as isolation barrier; 1/2″ FNPT process connection. This is a Specialty Custom product; please contact factory for price and availability. Minimum quantities may apply.
price by request
Available
- Pulsation Dampener smooths pump flow
- Surge Suppressor absorbs shocks and vibrations
- Water Hammer Arrestor eliminates dangerous pressure spikes caused by quick closing valves
- Inlet Stabilizer enhances pump performance and longevity
- Accumulator releases stored fluid during unwanted pressure drops
- Expansion Tank protects system from thermal volume increases
price by request
Available
Series RVDT/RVDTM is a universal automatic backpressure control valve for pressure relief, pump backpressure, pump bypass, anti-siphon, and backpressure regulator applications. Thermoplastic or Metal Valves designed for smooth, sensitive operation and the ultimate in corrosion resistance or ultrapure liquid handling with no wetted elastomers. Upstream pressure settings to 125 PSI on most models.
price by request
Available
With engineering, manufacturing, assembly and programming all provided by Plast-O-Matic, CAFE actuators are available with a wide range of voltage and performance options, as well as mounting and connections for virtually any valve requiring torque up to 20 Nm.
Minimum quantities may apply, depending on level of customization.
price by request
Available
Plast-O-Matic thermoplastic calibration columns are a quick and convenient way to measure or verify pump flow rates, chemical dosing, or chemical feed systems with higher accuracy than competitive models. Designed for precise, efficient testing with a variety of installation options.
price by request
Available
Series TRVDT is a high flow relief/by-pass valve with 3-port design, ideal for applications where minimal footprint is required or where use of a piping tee is impractical. Valve has a straight-through flow pattern when closed. When set point is exceeded, the diaphragm is lifted off the center port, and excess flows down and out through the third port at the bottom of the valve. 1/2″ – 1″ sizes in most popular thermoplastic materials and connections; 5 – 125 PSI set range.
price by request
Available
Double acting Air x Air or Fail-safe Air x Spring actuators designed for corrosive service. Features rugged plastic construction to NEMA 4X standards with direct manual override. Fail-safe valves can be normally-open or normally-closed. Most units can be hydraulically actuated.
For valves 3/8″ – 4″ sizes in PVC, CPVC, Natural Polypro, PVDF with FKM or EPDM. Available with NPT, socket, BSP, Sanitary, and other connection types.
price by request
Available
Series ARV designed to expel large volume of air at system start up, then close bubble tight. Unique self-guided poppet seals more reliably than ball designs; does not deform under pressure and assures minimal emission of system liquid prior to sealing. Sizes from 1/2″ to 4″ in a wide range of materials and connection types.
price by request
Available
Series RVT/RVTX is a high capacity angle pattern valve for relief, bypass, backpressure and pump backpressure applications with excellent corrosion resistance. 1/2″ – 2″ sizes in most popular thermoplastic materials and connections; 5 – 125 PSI set range. 3″ size provides settings 5 – 100 PSI.
price by request
Available
Double acting Air x Air or Fail-safe Air x Spring actuators designed for corrosive service. Features rugged plastic construction to NEMA 4X standards with direct manual override. Most units can be hydraulically actuated.
For valves 1/2″ – 2″ sizes in PVC or CPVC; 3″ & 4″ sizes in PVC, CPVC, Natural Polypro, PVDF. Available with NPT, socket, BSP, Flanges, and other connection types.
price by request
Available
Series DGV United States Patent #7,481,238 B2. Unique float design opens as air or gas collects in the valve, closes when liquid returns, allowing continuous expulsion of trace amounts of gas as it occurs. 1/2″ tee connection for virtually any pipe size; offered in a variety of corrosion resistant and ultrapure plastic materials — now including clear Acrylic for easy visual verification of degassing.
price by request
Available
Series RVD rugged compact designed for use as back pressure valve, straight relief, by-pass relief or back pressure regulator. 1/4″ and 1/2″ sizes in most popular thermoplastic materials and connections; 5 – 150 PSI set range.
price by request
Available
3/8″ – 4″ sizes in PVC, CPVC, Natural Polypro, PVDF with FKM or EPDM. 3/8″ – 2″ feature trunnion design, dual sliding seats. 3″ and 4″ sizes are single direction safe-block design. Available with NPT, Socket, BSP, Sanitary, Spigot and other connection types. ½” through 2” 2-way valves available in UV-blocking Red Kynar.
Options include Z-vent for sodium hypochlorite, Lock-out/Tag-out, Metering, Characterization, Stem Extensions, and Lateral Reducing connections.
price by request
Available
The CARD valve series is available in 1”, 2”, and 4” series (CARD100, CARD200, and CARD400 respectively). The valves are available in Geon PVC or Corzan CPVC plastic, and with Viton or EPDM seal materials. The valves are Normally Open (NO) when there is no pressure or liquid in the piping system. Process connections are NPT or socket. Vent side connection is NPT. For other material or connection requirements, please consult factory
price by request
Available
Series RVDM features a primary rolling diaphragm and a secondary flat diaphragm which incorporates the Plast-O-Matic patented Fail-Dry design for added protection. The rolling diaphragm provides greater sensitivity than non-diaphragm style relief valves, and is ideal for all applications without vacuum on the outlet. 1/2″ – 1″ sizes in most popular thermoplastic materials and connections; 5 – 100 PSI set range (5 – 125 PSI on 1/2″ only).
price by request
Available
Three-way version offers the same trunnion design, dual sliding seats and other premium features found in our 2-way valves. 1/2″ – 2″ sizes in PVC or CPVC, with 2-hole ball to prevent mixing, or 3-hole ball to prevent momentary deadhead. 3″ & 4″ sizes are Specialty Custom; minimum quantities apply.
price by request
Available