Nuova Fima is a leading Italian manufacturer of pressure gauges, electronic pressure transducers, diaphragm dividers, thermometers, thermowells for temperature sensors, pressure and temperature control devices in technological processes. The quality of our products, accuracy and safety meet the highest international standards, as confirmed by the relevant certificates. Nuova Fima has been manufacturing pressure and temperature measuring instruments for over 50 years.
Official website of the manufacturer www.nuovafima.com
OLIL SIA is an official distributor of NUOVA FIMA and supplies control & measuring instruments to Latvia, Estonia and Lithuania.
Bourdon tube “solid-front” pressure gauges HEAVY WORK DS 4”, 6” (100-150mm)
These instruments are designed for use in chemical and petrochemical processing industries, and in conventional power plants.They are built to resist the most severe operating conditions created by the ambient environment and the process medium. The high strength of the sensing element makes these instrument suitable to withstand high overpressure up to 4 times the full scale value and together with the case filling, they are suitable to high dynamic pulsating pressure. An Argonarc welded case/socket strengthens the whole construction. The solid-front version of these instruments is built in accordance with safety specifications of EN 837-1 and ASME B40.1. The safety construction consists of a solid separating wall in stainless steel, placed between the dial and the elastic element and a blow out back which is released from the case whenever an internal pressure, due to leaks, is created or the elastic element is broken.
price by request
Bourdon tube test gauges all stainless steel construction class 0,6% DS 6” (150mm)
These instruments have been designed for laboratories, instrument testing or recalibration facilities and in other applications where accuracy and repeatability are of primary importance. Thay can be used with fluids or gasses that do not have high viscosity and do not cristallize. The wetted parts in AISI 316L permits to use them in worse working conditions determined by aggressive ambients or process fluids. Upon request we can supply the calibration certificate issued by an Internationally recognized laboratory of ACCREDIA (Ex S.I.T. – Italian Calibration Service).
price by request
Bourdon tube “solid-front” pressure gauges turret case DS 4.5” (125 mm)
These instruments are built in conformity with the construction and safety specifications of ASME B40.1.
In case of leaks or break of the elastic element the operator is protected by a stainless steel safety cell solid front and by the blow-out back. They are usually used in the chemical, petrochemical industries and in conventional power plants. The TIG welding between the safety cell and the process socket strengthens the instrument and assures a better tight in case of dampening fluid The advantages of filling the case of the instrument with a dampening fluid are: reduced pointer fluctuation, reduced wear of rotating parts of the movement when pulsant vibrations and pulsations occur. Moreover condensation and corrosive atmospheres which could damage the internal parts.
price by request
Pressure gauges with electric contacts all stainless steel construction DS 6” (150mm)
These instruments are manufactured in accordance with the safety norms prescribed by UNI 8541, DIN 16006 e ANSI B40.1. They are used to control the electrical operation of compressors, pumps, presses, hydraulic and pneumatic equipments, chemical and petrochemical plant. In the event of leakage or break of sensing element, the operator is protected by a solid baffle wall placed on the instrument front and by the rear blow out wall. The contacts open or close the circuit depending on the position of the indicating pointer and they are adjustable over the whole range. For application on severe working conditions, such as rapid and frequent pressure change, vibration and pulsation, they are manufactured with the case liquid filled. The filling drastically reduce the effects of such factors as well as those caused by the corrosive atmosphere, making longer life and better performances of the pressure gauge and their electric contacts. They are also available with inductive contacts intrinsically safe.
price by request
Safety pressure gauges ”solid-front“ all stainless steel construction for high pressures, DS 4”, 6” (100-150mm)
These instruments are built in conformity with the construction and safety specifications of EN 837-1/S3 e ASME B40.1.
In case of leaks or break of the elastic element, the operator is protected by a solid separating wall placed on the front of the instrument and by the blow out back. They are mainly used on high pressure water jet technology like water cutting machines, hydro blasting pumps and turbines, hydrodemolition. The TIG welding between the case and the process socket, strengthens the instrument and assures a better tight in case of dampening fluid. The advantages of filling the case of the instrument with a dampening fluid are: reduced pointer fluctuation, reduced wear of rotating parts of the movement when pulsant vibrations and pulsations occur.
Moreover condensation and corrosive atmospheres which could damage the internal parts are prevented.
price by request
Bourdon tube test gauges all stainless steel construction, “solid-front” class 0,6% DS 6” (150mm)
These instruments have been designed for laboratories, instrument testing or recalibration facilities and in other applications where accuracy and repeatability are of primary importance. These intruments have a solid separating wall in stainless steel, placed between the dial and the elastic element and an integral blow out back that is released from the case whenever a pressure is created inside the case, due to leaks or accidental ruptures of the elastic element. Thay can be used with fluids or gasses that do not have high viscosity and do not cristallize. The wetted parts in AISI 316L permits to use them in worse working conditions determined by aggressive ambients or process fluids. Upon request we can supply the calibration certificate issued by an Internationally recognized laboratory of ACCREDIA (Ex S.I.T. – Italian Calibration Service).
price by request
Pressure gauge “solid-front” turret case DS 4.5″ (125mm)
These instruments are built in accordance with safety specifications ASME B40.1, UNI-EN 837-2.
The safety construction consists of a stainless steel “solid-front” safety cell placed behind the scale, which welding to socket gives to instrument an exceptional strength. Whenever, due to leaks, an internal pressure is created or the elastic element is broken the safety cell protects the front and sides, meanwhile the blow out back is released from the case. They are designed for use in chemical, petrochemical, conventional power plants. The dampened movement make them particularly suitable in presence of high vibrations and pulsating pressure.
price by request
Pressure gauges for SF6 gas monitoring DS 4” (100 mm)
These instruments are manufactured to monitor the electrical operations on hermetically sealed systems containing Sulphur Hexafluoride gas (SF6). The indication and the electrical operations are calibrated to the gas density (isochore) according to the relation pressure-temperature. The M5 model is suitable for indoor installation while the M6 model has been designed for the outdoor installation as well. The oil filled executions are particularly suitable for installation when vibrations are apparent.
price by request
With more than 80 years of experience and 5 branches worldwide, Nuova Fima contributes to the export of products labelled “Made in Italy” worldwide and participates in the development of measuring technology.
Most of the components used in the production of instruments are manufactured in Nuova Fima’s factory. In order to work with a very high level of quality and to fulfil production and service standards, all materials are selected with great care.
All components, both for mechanical and electronic instruments, are manufactured with modern automated equipment – optimising cost, guaranteeing precision and error-free performance.
The Bourdon tube is the heart of the pressure measuring system. The materials for the Bourdon tube are copper alloys and stainless steel (strictly AISI 316L), which are machined on special machines. The machines have been developed over many years of research and are the ” know how ” of the company. The shape of the machined Bourdon tube is checked by a very precise dimensional control system. The connection of the measuring element with the measurement standards is achieved through the use of a laser marking system.
Welding and brazing procedures are certified and use modern automatic robotic systems, backed up by the high professionalism of the operators, who are a key factor in the success of the company.
All welded parts are tested on a helium leak detector capable of measuring leaks of 1 x 10-7mbar/l/s-1.
All calibration and assembly procedures are performed using high-performance automated systems designed specifically for us. Calibration procedures are carried out by the co-operation of our well-trained technical staff.
Our manufacturing methods guarantee the reliability of measurement accuracy and repeatability that is inherent in Nuova Fima products, which are at the forefront of the pressure and temperature measurement market.
In the early 1970’s, long before the advent of quality systems, Nuova Fima considered the quality of raw materials, components and finish products to be very important. In order to implement our own quality system, we started a policy of staff development. This policy continues to this day. Continuous improvement is a guarantee that the quality of the appliances manufactured in Europe by Nuova Fima cannot be beaten.